Need help?Do you have a question about the Mesalabs 90XL and is the answer not in the manual?
General| Brand | Mesalabs |
|---|---|
| Model | 90XL |
| Category | Measuring Instruments |
| Language | English |
Important warnings and cautions for using the 90XL meter and sensor modules.
Details on the protective holder and its use for tilt stand or IV pole mounting.
Explanation of the function of each key and symbol on the device interface.
Visual representation of the navigation path through the 90XL meter's screens.
Overview and explanation of the MAIN and MENU screens of the 90XL meter.
General steps for turning the 90XL meter on, connecting modules, and taking measurements.
Step-by-step instructions for connecting and disconnecting sensor modules from the display module.
Guide on configuring meter settings like date/time, auto-off, brightness, and contrast.
Procedure for changing conductivity, temperature, and pressure units on the meter.
Instructions for performing conductivity, temperature, pH, and pressure measurements.
Procedure to verify calibration for the conductivity/temperature sensor module.
Procedure to verify calibration for the pH sensor module using buffer solutions.
Steps to verify the calibration of the pressure sensor module using a reference standard.
General guidelines and recommendations for sensor module calibration procedures.
Procedure to reset sensor module calibration settings back to factory defaults.
Detailed steps for calibrating the conductivity/temperature sensor module at different ranges.
Step-by-step guide for calibrating the pH sensor module using buffer solutions.
Procedure for performing a zero calibration on the pressure sensor module.
To Next Page
