Metabo HPT DS 18DEX User Manual

Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual before operating the power tool. Please keep this manual available for other users
and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe
ser guardado en un lugar seguro.
Model
Modèle
Modelo
DS 18DEX
DV 18DEX
Cordless Driver Drill
Perceuse-visseuse sans fi l
Taladro atornillador inalámbrico
Cordless Hammer Drill
Perceuse à percussion sans fi l
Taladro de percusión inalámbrico
DS18DEX
DV18DEX
000BookDS18DEXmetabo.indb1000BookDS18DEXmetabo.indb1 2022/07/1113:46:002022/07/1113:46:00

Metabo HPT DS 18DEX Specifications

General

Type	Cordless Drill
Voltage	18V
Chuck Size	1/2 inch
Max Torque	620 in-lbs
Speed Settings	2
Battery Type	Lithium Ion

Summary

Important Safety Information

Meanings of Signal Words

Defines signal words like WARNING, CAUTION, and NOTE used in the manual.

General Power Tool Safety Warnings

Provides essential safety precautions for operating power tools.

Battery Charger Safety Instructions

Important Safety Instructions for Battery Charger

Crucial safety guidelines for the safe operation and maintenance of battery chargers.

Lithium-Ion Battery Safety

Caution on Lithium-Ion Battery

Specific warnings and precautions for handling lithium-ion batteries.

Lithium-Ion Battery Transportation

Functional Description

Name of Parts

Identifies and labels the key components of the power tool.

Specifications

Tool and Charger Specifications

Details technical specifications for the driver drill, hammer drill, and battery charger.

Assembly and Operation - Initial Steps

Applications, Battery Handling, and Charging

Covers tool uses, battery installation/removal, and charging procedures.

Operation - Pre-Use and Bit Handling

Pre-Operation Checks and Bit Mounting

Essential checks before use and instructions for mounting/dismounting bits.

Speed, Direction, and Battery Control

How to change rotation speed, direction, and check battery mounting.

Operation - Clutch and Torque Settings

Scope of Use and Clutch Settings

Guidance on tool applications and adjusting clutch dial settings.

Operation - Torque, Switch, and Speed

Torque Adjustment and Switch Operation

How to adjust tightening torque and operate the switch.

Operation - Indicators and Features

Drilling into Brick and Speed Selection

Specifics for drilling into brick and selecting rotational speed.

Battery Indicator and LED Light Usage

How to check battery level and use the LED work light.

Hook Usage and Reactive Force Control

Instructions for using the hook and understanding reactive force control.

Operational Cautions

Important warnings regarding continuous use and potential overheating.

Maintenance and Inspection

Bit, Screw, and Dust Checks

Procedures for checking bits, screws, and dust accumulation.

Battery Disposal and Terminal Inspection

Guidelines for safe battery disposal and terminal maintenance.

Accessories

Standard Accessories

Lists the included standard accessories with the tool.

Optional Accessories

Lists accessories available for separate purchase.