English
9
DOUBLE
INSULATION FOR SAFER OPERATION
To ensure safer operation of this power tool, metabo HPT has adopted a double
insulation design. “Double insulation “ means that two physically separated insulation
systems have been used to insulate the electrically conductive materials connected to the
power supply from the outer frame handled by the operator. Therefore, either the symbol
“ ” or the words “Double insulation” appear on the power tool or on the nameplate.
Although this system has no external grounding, you must still follow the normal electrical
safety precautions given in this Instruction Manual, including not using the power tool in
wet environments.
To keep the double insulation system effective, follow these precautions:
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO
OTHER USERS OF THIS TOOL!
䡬
O
nly metabo HPT AUTHORIZED SERVICE CENTER should disassemble or assemble this
power tool, and only genuine metabo HPT replacement parts should be installed.
Clean the exterior of the power tool only with a soft cloth moistened with soapy
water,and dry thoroughly.
Never use solvents, gasoline or thinners on plastic components; otherwise the plastic
may dissolve.
䡬
To Next Page
Loading...
Need help?
General