9
English
FUNCTIONAL DESCRIPTION
NOTE
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance
of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have fi rst read and understood all safety
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own
power tool.
NAME OF PARTS
1. Cordless Rebar Cutter/Bender (VB3616DA)
Nameplate
Switch panel
Mode indicator lamp
Manual Mode switch
Moter
(Inside the Housing)
Lever
Screw hole for
fastening body
Hole for
fastening body
Gear cover
Warning label
(Bending)
Warning label (Cutting)
Warning label (Battery Cover)
Switch trigger
Switch lock
Setting dial
Reaction stopper A
Reaction stopper B
Bending
roller
Guide
Hexagonal
bar wrench
Turn table
Inner cover
Cover
Handle
Center plate
Center roller
Battery Cover
Battery
Fig. 2
Lever
Grip rubber
Cutter guard
Upper cutter
Lower cutter
Cam cover
Hexagon socket bolt
Reaction stopper B
Fig. 3
00BookVB3616DANA.indb900BookVB3616DANA.indb9 2019/10/0412:19:312019/10/0412:19:31
To Next Page
Loading...