Metabo BS 18 L Original Instructions

ENGLISHen
14
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-circu-
iting (e. g. by protecting them with adhesive tape).
Fig. L. We reserve the right to make technical
improvements.
U = Voltage of battery pack
n
0
= No-load speed
Tightening torque for screwing:
M
1
= Soft screwing application (wood)
M
3
= Hard screwing applications (metal)
M
4
= Adjustable torque
Max. drill diameter:
D
1 max
= in steel
D
2 max
= in softwood
D
3 max
= in masonry
s=Max. impact rate
m = Weight (with the smallest battery pack)
G=Spindle thread
D
max
= Chuck clamping range
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
h, ID
= Vibration emission value
(impact drilling in concrete)
a
h, D
= Vibration emission value
(Drilling in metal)
a
h, S
= Vibration emission value (screwing
without impact)
K
h, ...
= Uncertainty (vibration)
Typical A-effective perceived sound levels
:
L
pA
=Sound-pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
=Uncertainty (noise level)
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
12. Technical Data

Metabo BS 18 L Specifications

General

Number of gears	2
Sound power level	88 dB
Chuck capacity (max)	13 mm
Chuck capacity (min)	1.5 mm
Sound pressure level	77 dB
Idle speed (1st gear)	450 RPM
Idle speed (2nd gear)	1800 RPM
Sound level uncertainty	3 dB
Drilling diameter in wood (max)	20 mm
Drilling diameter in steel (max)	10 mm
Vibration level (metal drilling)	2.8 m/s²
Maximum torque (hard applications)	50 N⋅m
Maximum torque (soft applications)	25 N⋅m
Product color	Black, Green, Red, Silver
Uncertainty K	1.5 m/s²
Power source	Battery
Battery voltage	18 V
Battery capacity	2 Ah
Battery level indicator	Yes
Chuck type	Keyless
Product design	Pistol grip drill
Number of batteries included	2 pc(s)
Maximum torque (imperial)	442.5 in⋅lbs

Weight and Dimensions

Weight	1600 g