ENGLISH en
13
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
V
1
= Air requirement
p
max.
= maximum permissible supply pressure
n
0
= Rotational speed
S = max. screw diameter
T
max.
= torque (adjustable)
d
i
= Hose diameter (inner)
C = Connecting thread
A = Dimension: Length x Width x Height
m = Weight
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
Using these values, you can estimate the
emissions from this tool and compare these with the
values emitted by other tools. The actual values
may be higher or lower, depending on the particular
application and the condition of the tool or acces-
sory. In estimating the values, you should also
include work breaks and periods of low use. Based
on the estimated emission values, specify protec-
tive measures for the user - for example, any organ-
isational steps that must be put in place.
Vibration (acceleration value, frequency-weighted
according to EN 28927):
a
h
=Vibration emission level
K
h
=Measurement uncertainty (vibration)
Sound level (EN ISO 15744):
L
pA
=Sound pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Measurement uncertainty
Wear ear protectors!
11. Technical specifications
To Previous Page
Loading...
Need help?
General
