To Next PageTo Next Page
Need help?Do you have a question about the Metabo FSB 36-18 LTX BL 40 and is the answer not in the manual?
Familiarise yourself with the controls and the proper use of the machine.
Always wear sturdy, non-slip shoes and long, durable trousers when operating the machine.
Kickback is the sudden response to an accessory pinching or jamming.
Use the machine only in daylight or good artificial light.
Accidents caused by poorly maintained power tools.
Use only original Metabo or CAS (Cordless Alliance System) battery packs and accessories.
WARNING – General hazards!
Adjust the length in such a way that the machine is about half a hand's breadth below the hip.
Firmly hold the machine with the right hand on the handle (2) and the left hand on the handle (7).
Hold the machine by the handles with both hands and wait until the machine has come to a complete standstill.
Always guide the cutting head (11) close to the ground. The cutting head (11) evenly back and forth.
With the machine running, briefly tap the line head (29) on the ground.
Clean after each use: Remove grass clippings, leaves, dirt and other deposits.
Always keep the cutting line moist. A dry cutting line breaks off more quickly and wears out faster.
Check the machine for damaged, missing or loose parts such as screws, nuts, bolts and caps before each use.
See chapter 6.3. Order number see chapter 11.
A blunt or incorrectly sharpened blade (24) increases the risk of kickback.
Lubrication is not required.
General| Type | Brush cutter |
|---|---|
| Cordless | Yes |
| Head type | Blade & nylon line |
| Telescopic | No |
| Handle type | U-type handle |
| Product color | Green |
| Uncertainty K | 1.5 m/s² |
| Rotational speed | 6000 RPM |
| Sound power level | 94 dB |
| Vibration emission | 1.4 m/s² |
| Sound pressure level | 85 dB |
| Cutting diameter (max) | 400 mm |
| Sound pressure level uncertainty | 2.5 dB |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Weight | 4700 g |
|---|
