Need help?Do you have a question about the Metabo KFM 15-10 F and is the answer not in the manual?
General| Manufacturer | Metabo |
|---|---|
| Model | KFM 15-10 F |
| Power Consumption | 1500 W |
| Input power | 1500 W |
| Output power | 1000 W |
| Cutting height | 15 mm |
| Disc Diameter | 150 mm |
| Cable Length | 4 m |
| Spindle Thread | M14 |
Precautions regarding power tool plugs, outlets, and avoiding contact with grounded surfaces.
Advice on staying alert, using PPE, preventing unintentional starting, and proper attire.
Detailed explanation and prevention of kickback, a sudden tool response.
Step-by-step guide to setting the desired chamfer angle on the machine.
Procedure to set the chamfer height using diagrams and trial cuts.
Procedure for safely removing, cleaning, and refitting or replacing indexable inserts.
Guidance on resolving common problems like reduced speed or the machine not starting.
To Next Page
