14
ENGLISH
ENG
wiring or its own cord
. Cutting accessory
contacting a "live" wire may also energise metal
parts of the power tool, resulting in an electric
shock.
Always wear protective goggles, gloves, a dust
mask and sturdy shoes when working with this
tool.
Ensure that the spot where you wish to work is
free of
power cables, gas lines or water pipes
(e.g. using a metal detector).
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break or a high reverse torque may build up on
the handle.
Always hold the machine with both hands using
the handles provided, stand securely and
concentrate.
Work only with the additional handle correctly
installed.
A damaged or cracked additional handle must be
replaced. Never operate a machine with a defec-
tive additional handle.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Protect battery packs from water and moisture!
Never use faulty or deformed battery packs!
Do not expose battery packs to naked flame!
Do not open battery packs!
Do not touch or short-circuit battery packs!
A caustic fluid may leak from defective
NiCd battery packs (30% caustic potash
solution)!
Slightly acidic, flammable fluid may leak
from defective Li-ion battery packs!
If battery fluid from NiCd or Li-ion battery packs
leaks out and comes into contact with the skin,
rinse the affected area thoroughly with water. If
battery fluid leaks out and comes into contact
with your eyes, wash them with clean water and
seek medical treatment immediately!
See page 3.
KHA 24:
1Depth stop
2 Tool lock
3 Additional handle
4 Switch button
5Lock
6 Battery pack LED (unlocked / locked)
7 Machine LED
(switched on / off; overload indicator)
8 Receiver (for CODE! Key)
9 Rotation selector switch
(direction of
rotation setting, transporting safety
device)
10 Trigger switch
11
Capacity and signal display
(only for Li-ion battery pack)
*
12
Button for capacity and signal display
(only for Li-ion battery pack)
*
13 2 battery-pack release buttons
14 Battery pack
CODE! Key *:
15 Button for closing (CODE! Key) *
16 Button for opening (CODE! Key) *
17 Transmitter (CODE! Key) *
18 Battery status display (CODE! Key) *
19 Code wheels (inside the CODE! Key) *
* not in scope of delivery.
• Optimised centre of gravity
• Aluminium cast gear housing for optimised
heat dissipation and stability
• Impact stop for non-impact drilling (e.g. in tiles,
metal, wood) and for screwdriving
• Rotary stop for chiselling
• Right-left rotation
5Overview
6 Special Product Features
17026795_0411 KHA 24 14_SPR.book Seite 14 Dienstag, 29. November 2011 2:33 14
To Next Page
Loading...
Need help?
General