To Next PageTo Next Page
Need help?Do you have a question about the Metabo KHE 55 and is the answer not in the manual?
General| Brand | Metabo |
|---|---|
| Model | KHE 55 |
| Category | Rotary Hammer |
| Language | English |
Keep work area clean and well lit; avoid accidents.
Grounded tools must be plugged into properly installed and grounded outlets.
Stay alert, watch what you are doing, and use common sense when operating.
Use correct tool for application; it works better and safer.
Tool service must be performed only by qualified personnel.
Release wing nut, set depth stop to desired depth, retighten wing nut.
Clean shank, apply grease, use SDS-max tools for insertion/removal.
Press lock, select mode by turning switch button (must be horizontal).
Chisel locks in 8 positions; insert chisel and turn switch button to desired position.
Turn adjusting wheel for desired value; higher number means greater speed/force.
Press trigger switch to turn on; release trigger switch to turn off.
