Need help?Do you have a question about the Metabo KHEV 5-40 BL and is the answer not in the manual?
General| Drilling | - |
|---|---|
| Chiseling | Yes |
| Chuck type | SDS Max |
| Motor type | Brushless motor |
| Product color | Black, Green, Red |
| Power protection features | Overheating, Overload |
| Impact rate | 2900 bpm |
| Rated speed (max) | 500 RPM |
| Rated speed (min) | 350 RPM |
| Sound power level | 104 dB |
| Impact energy (max) | 8.7 J |
| Sound pressure level | 93 dB |
| Sound level uncertainty | 3 dB |
| Spindle collar diameter | 64.6 mm |
| Vibration level (chiseling) | 9.6 m/s² |
| Vibration level (hammer drilling) | 10.8 m/s² |
| Drilling diameter in concrete (max) | 40 mm |
| Vibration level uncertainty (hammer drilling) | 1.5 m/s² |
| Drilling diameter in concrete with core cutters (max) | 105 mm |
| Cord length | 6 m |
| Input power | 1150 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Weight | 8300 g |
|---|
Defines intended use and limitations for KHEV and MHEV tools.
Comprehensive safety guidelines covering work area, electrical, personal safety, and tool use/care.
Use ear protection and other PPE like goggles, gloves, dust mask, and sturdy shoes.
Proper handling, cable management, workpiece securing, and work area checks for safe operation.
Awareness of chemical dust hazards and risks from hot tool parts after operation.
Instructions for correctly assembling the bow or additional handle for safety.
Procedure for setting the depth stop for drilling operations on KHEV 5-40 BL.
Steps for inserting and removing SDS-max tools, including lubrication and checking seating.
How to select operating mode (impact drilling, chiselling) and adjust chisel position.
Setting the impact force and speed to reduced (70%) or maximum (100%) levels.
How to operate the trigger switch and enable/disable continuous operation mode.
Explanation of the integrated damping system for reduced vibrations and user comfort.
Steps for cleaning the power tool using a vacuum cleaner or dry air, with safety precautions.
Interpreting the electronic signal indicator for flashing (restart protection) and continuous illumination (overload).
Guidance on using only genuine Metabo accessories that meet specified requirements.
Emphasizes that repairs must be performed by qualified electricians or authorized service workshops.
Advice on disposal, recycling, technical specifications, and emission values.
To Next Page
