Metabo KT 18 LTX 66 BL User Manual

www.metabo.com
de Originalbetriebsanleitung 6
en Original instructions 14
fr Notice originale 21
nl Oorspronkelijke gebruiksaanwijzing 29
it Istruzioni originali 37
es Manual original 45
pt Manual de instruções original 53
sv Bruksanvisning i original 61
fi Alkuperäiset ohjeet 68
no Original bruksanvisning 75
da Original brugsanvisning 82
pl Instrukcja oryginalna 89
el Πρωτότυπο οδηγιών χρήσης 97
hu Eredeti használati utasítás 105
ru Оригинальное руководство по
эксплуатации 112
uk Оригінальна інструкція з
експлуатації 121
KT 18 LTX 66 BL
KT 66 BL

Metabo KT 18 LTX 66 BL Specifications

General

Motor type	Brushless
Product color	Black, Green, Silver
Built-in light	No
Dust extraction port	Yes
Suitable for materials	Wood
Power source	Battery
Battery voltage	18 V
Wrench type	Hexagonal wrench
Blade bore	20 mm
Cutting speed	43 m/s
Blade diameter	165 mm
Idle speed (max)	5000 RPM
Idle speed (min)	2250 RPM
Sound power level	99 dB
Bevel capacity (max)	46 °
Cutting depth (45º)	43 mm
Cutting depth (90º)	66 mm
Sound pressure level	88 dB
Sound level uncertainty	3 dB

Weight and Dimensions

Weight	5300 g

Summary

Declaration of Conformity

Specified Conditions of Use

General Safety Information

Special Safety Instructions

Cutting procedures

Detailed instructions for safe cutting, including hand placement and workpiece support.

Kickback - causes and related warnings

Explains kickback, its causes, and how to avoid it with proper precautions.

Guard function

Ensuring the guard operates correctly for user safety during operation.

Additional safety instructions

General safety advice, including not using abrasive wheels and wearing protective gear.

Special safety instructions for cordless tools

Safety precautions specific to cordless machines, including battery handling.

Overview

Initial Operation and Setting

Especially for cordless machines

Guidance on battery pack usage, charging, insertion, and removal for cordless models.

Especially for mains powered machines

Checks for mains powered models, including voltage, frequency, and RCD installation.

Setting cutting depth

Instructions on how to adjust the cutting depth for optimal results.

Slanting saw blade for diagonal cuts

Procedure for setting the saw blade angle for diagonal cuts and undercuts.

Rotational speed preselection

How to select the appropriate rotational speed for different tasks.

Setting extraction connection piece / dust ejection

Adjusting the connection piece for dust extraction or ejection.

Adjusting the glass guard

Positioning the glass guard for different cutting angles and guide rail use.

Use

The machine's multifunctional monitoring system

Explanation of the machine's automatic protection modes and overload causes.

Switching on and off

Instructions for safely switching the power tool on and off.

Working Directions

Guidance on various cutting techniques like plunge cuts and using guide rails/rip fences.

Maintenance

Changing saw blades

Step-by-step guide for safely replacing the saw blade.

Correcting the saw blade angle

Instructions for adjusting the saw blade angle if it deviates from factory settings.

Cleaning

Accessories

Repairs

Environmental Protection

Technical Specifications