Metabo LC 40 Manual

ENGLISH en
5
The operating display (4) flashes and the battery is
charged.
When the battery pack is fully charged, the
operating display (4) lights up continuously.
The battery pack can remain in the battery charger
and is therefore always ready for use.
8.1 Warning display (3) lights up
continuously
• Battery pack is not charged. Excessive/
Insufficient temperature. When the temperature
of the battery pack is between 0 °C and 50 °C, the
charging process begins automatically.
8.2 Warning display (3) flashes
• Battery pack is defective. Remove the battery
pack immediately from the charger.
• Short circuit between the charging contacts.
Check the contacts for foreign bodies.
Repairs to the charger must only be carried out by
qualified electricians.
If the mains connection cable of this tool is
damaged, in order to prevent endangering
personnel and property it must be replaced by the
manufacturer, or the Customer Service of the
manufacturer, or a similarly qualified person.
Contact your local Metabo representative if you
have Metabo chargers requiring repairs. For
addresses see www.metabo.com.
Metabo's packaging can be 100% recycled.
Worn out chargers and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.
Changes due to technological progress reserved.
Voltage ranges of the battery packs.....= 10.8 V
Charging current..................................= 2.3 A
Charging time
)
(Li-ion battery pack,
1.5 Ah).................................................= 40 min
1)
Depending on the residual capacity and the
temperature of the battery pack, real charging times
may deviate from the specifications.
Machine in protection class II
~Alternating current
8. Fault
9. Repairs
10. Environmental Protection
11. Technical Specifications

Metabo LC 40 Specifications

General

Product color	Black, Green
Drilling	Yes
Product design	Pistol grip drill
Number of batteries included	3 pc(s)
Power source	Battery
Battery voltage	10.8 V
Battery capacity	2 Ah