To Next PageTo Next Page
Need help?Do you have a question about the Metabo P 2000 G and is the answer not in the manual?
Warnings regarding exposure to rain, damp environments, and explosive locations.
Alerts about scalding risks from hot water leaks due to device faults.
Precautions against direct water jets on electrical components and handling plugs.
Instructions for checking the device for damage and risks of using faulty equipment.
Guidelines for setting up the unit horizontally in a dry, well-ventilated, and secure location.
Instructions for connecting the suction line to prevent mechanical stress and ensure water intake.
Guidance on connecting the discharge line to prevent mechanical stress and ensure pressure resistance.
Requirements for connecting the device to a properly installed and tested earthed outlet.
Describes the principle of operation and steps for starting and stopping the pump.
Checks for damage, leaks, and cleaning of intake filters and pump components.
Instructions for storing the device in frost-free conditions to prevent damage.
Steps to drain and store the device safely in frost-free conditions.
Identifies common causes for the pump failing to start, such as no mains voltage or motor issues.
Addresses issues like lack of water, air leaks, clogged filters, or high suction height.
Covers problems like suction line leaks, clogged pumps, or incorrect pressure switch settings.
Procedure for restoring pilot pressure in the vessel for HWW models when needed.
Warnings regarding exposure to rain, damp environments, and explosive locations.
Alerts about scalding risks from hot water leaks due to device faults.
Precautions against direct water jets on electrical components and handling plugs.
Instructions for checking the device for damage and risks of using faulty equipment.
Guidelines for setting up the unit horizontally in a dry, well-ventilated, and secure location.
Instructions for connecting the suction line to prevent mechanical stress and ensure water intake.
Guidance on connecting the discharge line to prevent mechanical stress and ensure pressure resistance.
Requirements for connecting the device to a properly installed and tested earthed outlet.
Describes the principle of operation and steps for starting and stopping the pump.
Checks for damage, leaks, and cleaning of intake filters and pump components.
Instructions for storing the device in frost-free conditions to prevent damage.
Steps to drain and store the device safely in frost-free conditions.
Identifies common causes for the pump failing to start, such as no mains voltage or motor issues.
Addresses issues like lack of water, air leaks, clogged filters, or high suction height.
Covers problems like suction line leaks, clogged pumps, or incorrect pressure switch settings.
Procedure for restoring pilot pressure in the vessel for HWW models when needed.
General| Flow rate | 2000 l/h |
|---|---|
| Maximum suction height | 8 m |
| Maximum delivery height | 30 m |
| Maximum operating pressure | 3 bar |
| Proper use | Garden |
| Product color | Black, Green, Silver |
| Immersible | - |
| Suction port | 1\ |
| Transport wheels | No |
| Carrying handle(s) | Yes |
Weight and Dimensions| Weight | 7600 g |
|---|
