ENGLISH
9
ENG
Before disposal, discharge the battery pack in
the power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U = Voltage of battery pack
n
0
= No-load speed
s = Impact frequency
H = Machine tool attachment
m = weight (with smallest battery pack)
M
max
= Max. tightening torque
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
10 Technical Specifications
To Next Page
Loading...
