Metabo PSE 1200 User Manual

Operating Instructions........... page
Mode d’emploi ...................... page
Instrucciones de manejo .... página
Instruções de serviço ......... página
170 26 8340 - 0806 - 646793-0
5
10
15
20
PSE 1200
17026834_0806 PSE 1200 NAFTA.book Seite 1 Dienstag, 1. August 2006 1:42 13

Metabo PSE 1200 Specifications

General

Power Input	1200 W
Stroke rate at no load	0 - 2600 rpm
Stroke length	28 mm
Weight (without power cable)	3.9 kg
Cutting depth in steel	10 mm
Cable length	4 m

Summary

Specified Use of the PSE 1200 Saw

Tool Application Guidelines

General Safety Rules

Work Area, Personal Safety, and Alertness

Electrical Safety and Cord Handling

Specific Safety Rules

Safe Handling and Electrical Hazard Avoidance

Hold tool by insulated surfaces, beware of live wires, and protect against dust/vapors.

Work Area Safety and Protective Equipment

Wear protective gear, check work area for hazards, and use ear protection and dust masks.

Tool Use and Care

Workpiece Securing and Tool Operation

Maintenance and Accessory Usage

Assembly, Initial Operation, and Setting

Pre-Operation Checks and Saw Blade Installation

Check mains voltage, install saw blade securely, and ensure it is seated correctly.

Guide Adjustment for Cutting Depth

Operation of the PSE 1200 Saw

Switching and Stroke Rate Adjustment

Operate the trigger switch to turn the tool on/off; adjust stroke rate via trigger pressure.

Sawing Techniques and Plunge Cuts

Use appropriate saw blades, guide the machine, avoid recoil, and perform plunge cuts safely.

Technical Specifications

Key Specifications and Noise Level