10
ENGLISH
ENG
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Metabo electrical tools which require repair may
be sent to a Metabo service centre. For addresses
see www.metabo.com.
Please enclose a description of the fault when
sending the tool for repairs.
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
T
1
= Maximum material thickness in wood
T
2
= Maximum material thickness in non-
ferrous metals
T
3
= Maximum material thickness in sheet
steel
n
0
= Stroke rate at idle speed
m = Weight with smallest battery pack
Wear ear protectors!
Machine in protection class II
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
11 Repairs
12 Environmental Protection
13 Technical Specifications
To Next Page
Loading...
Need help?
General
