Need help?Do you have a question about the Metabo W 14-125 Ergo and is the answer not in the manual?
General| Power Input | 1400 W |
|---|---|
| Disc Diameter | 125 mm |
| No-load Speed | 11000 rpm |
| Spindle Thread | M14 |
| Cable Length | 4 m |
Keeping the work area clean, well-lit, and free from flammable atmospheres and bystanders.
Guidelines for safe electrical connection, avoiding contact with earthed surfaces, and protection from rain/wet conditions.
Advice on staying alert, using PPE, preventing unintentional starting, and maintaining balance.
Proper use, care, and maintenance of the power tool to ensure safe operation.
Guidelines for servicing the power tool using identical replacement parts to maintain safety.
General safety warnings for grinding, sanding, wire brushing, and abrasive cutting-off operations.
Understanding and preventing kickback, a sudden reaction causing tool to be forced in opposite direction.
Specific safety guidelines for grinding and cutting-off operations, including accessory selection and mounting.
Precautions for abrasive cutting-off, including avoiding jamming, proper body positioning, and restart procedures.
Do not use oversized sanding disc paper to avoid laceration hazards and snagging.
Be aware of thrown wire bristles and avoid overstressing the brush.
Handling grinding discs, workpiece security, spindle thread compatibility, and dust reduction.
Ensuring the additional handle is always attached securely for proper control.
Properly attaching the safety guard for grinding wheels to ensure operator safety.
Engaging and positioning the main handle for optimal control and comfort.
Connecting the tool to a protected power supply with time-delay fuses or circuit breakers.
How to lock the spindle using the spindle locking button for accessory changes.
Positioning the grinding wheel correctly on the support flange.
Instructions for securing and releasing the clamping nut for grinding wheels.
Proper procedures for switching the tool on, off, and for continuous operation.
Guidance for grinding, roughing, separating, sanding, and wire brushing operations.
Regularly cleaning motor air vents using a vacuum cleaner to prevent hazards.
Cleaning the handle adjustment button while disconnected from power.
To Next Page