To Next PageTo Next PageWhy does my Metabo W 24-180 Grinder have brief voltage reductions when I switch it on?
Brief voltage reductions during Metabo Grinder startup are often due to unfavorable power conditions. To resolve this, ensure your power impedance is less than 0.2 ohms; this should prevent any malfunctions.
General| Power Input | 2400 W |
|---|---|
| Disc Diameter | 180 mm |
| No-load Speed | 8500 rpm |
| Cable Length | 4 m |
| Grinding wheel diameter | 180 mm |
| Power Output | 1600 W |
| Spindle thread | M14 |
Guidelines for maintaining a clean, well-lit, and safe work environment.
Specific safety advice for grinding, sanding, wire brushing, and abrasive cutting.
Guidance on alertness, protective equipment, and preventing unintentional starts.
Understanding and preventing kickback, a sudden reactive force during operation.
Specific safety advice for grinding and abrasive cutting operations.
