Contents
1 Proper Use
2 General Safety Rules
3 Specific Safety Rules
4 Functional Description
5 Special Product Features
6 Assembly, Initial Use
7 Operation, Switching On/Off
8 Operation, Setting Speed
(depending on equipment)
9 Operation, Fitting Tools
9.1 Fitting cutting and grinding discs
9.2 Securing/releasing the Quick
clamping nut (11): For Type 27
grinding wheel use only
9.3 Securing/releasing the
clamping nut (12):
For Type 1 cut-off wheels OR
Type 27 grinding wheels
10 Maintenance
11 Troubleshooting
12 Accessories
12.1 Removing the wheel guard
12.2 Fitting the hand guard
12.3 Fitting the backing pad and sanding
discs
12.4 Fitting the wire brush
12.5 Fitting the cup-grinding wheel with
wheel guard
12.6 Fitting the cutt-off wheel guard
13 Repairs
14 Environmental Protection
15 Technical Specifications
1 Proper Use
Equipped with the appropriate accessories,
Metabo angle grinders are suitable for cutting,
grinding, sanding with a backing pad and
brushing metal, concrete, stone and similar
materials in dry operating conditions.
Saw discs, saw chains or similar parts must not
be used under any circumstances.
The operator bears sole responsibility for any
damage caused by inappropriate use.
The generally recognised accident prevention
regulations and the accompanying Safety
Instructions must be observed.
2 General Safety Rules
1 WARNING! Read and understand all
instructions.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS.
2 Work Area
2.1 Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2.2 Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
2.3 Keep bystanders, children, and visitors
away while operating a power tool. Distractions
can cause you to lose control.
3 Electrical Safety
3.1 Grounded tools must be plugged into an
outlet properly installed and grounded in
accordance with all codes and ordinances.
Never remove the grounding prong or modify
the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you
are in doubt as to whether the outlet is
properly grounded. If the tools should
electrically malfunction or break down, grounding
provides a low-resistance path to carry electricity
away from the user.
Applicable only to Class I (grounded) tools.
3.2 Double insulated tools are equipped with
a polarized plug (one blade is wider than the
other).This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a
Instruction for use
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new Metabo power tool.
Every Metabo power tool is carefully tested and is subjected to the strict quality controls of the Metabo
Quality Assurance section. However, the service life of any power tool is to a great degree dependent on
yourself as the user. Please read and understand the information contained in these Operating
Instructions and the accompanying documents. The more care you exercise in handling your Metabo
power tool, the longer will be the reliable service it provides for you.
5
ENGLISH
To Next Page
Loading...
Need help?
General
