EasyManua.ls Logo

Metallwarenfabrik Gemmingen Geko 2801 E-A/MHBA - User Manual

Metallwarenfabrik Gemmingen Geko 2801 E-A/MHBA
60 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung • User manual • Инструкция по эксплуатации
Stromerzeuger-Systeme • Power Gensets • Электрогенераторные системы
Geko
®
2801 E-A/MHBA H 2801
1
Metallwarenfabrik Gemmingen
Question and Answer IconNeed help?

Do you have a question about the Metallwarenfabrik Gemmingen Geko 2801 E-A/MHBA and is the answer not in the manual?

Summary

1. Safety Instructions

1.1 Generator Construction

Describes the generator's construction, protection types, and compliance.

1.2 Mitsubishi Petrol Engine

Details the engine type, cooling, crankshaft, oil cut-out, and fuel type.

1.3 Generator Components

Outlines the main components: motor, generator, switch box, and framework.

2. Technical Data

2.1 Motor Technical Data

Specifies motor type, cooling system, and ignition system.

3. Electrical Equipment

4. Electrical Connections & Safety

4.1 Electrical Connection

Explains factory settings for IT network, neutral lead, socket connection, and extension leads.

4.2 Protection Against Electric Shock

Discusses safety cut-out, equipotential bonding, and RCD switches.

4.3 Thermal Protective Cut-out

Explains the thermal monitoring of windings and restart procedure after overheating.

5. Operation Possibilities

5.1 Outdoor Operation

Recommends open-air operation for optimal airflow and specifies site requirements.

5.2 Indoor Operation

Details regulations and precautions for operating in enclosed spaces.

6. Noise Levels

7. Operating Electrical Equipment

8. Pre-Operation Checks

8.1 Motor Oil Level Check

Provides steps for checking and topping up the engine oil level.

8.2 Air Filter Maintenance

Instructs on checking, cleaning, or replacing the air filter inserts.

8.3 Fuel Handling and Use

Advises on using appropriate petrol, handling, and filling procedures.

9. Starting the Motor

10. Controls Operation

10.1 Oil Warning System

Explains the function and behavior of the oil warning system.

11. Stopping the Motor

12. Troubleshooting Guide

12.1 Motor Not Starting

Lists potential causes and corrections for the motor not starting.

12.2 Generator Not Starting

Lists potential causes and corrections for the generator failing to start.

12.3 Low or No Voltage Output

Lists causes and corrections for voltage output issues.

12.4 Low RPM & Excitation Issues

Lists causes and corrections for low motor speed and excitation problems.

12.5 Voltage Drop Under Load

Addresses voltage drop under load conditions.

12.6 Climate Effects on Performance

Discusses how climatic conditions can affect generator performance.

12.7 High Generator Voltage

Lists causes and corrections for excessive generator voltage.

12.8 Generator Overheating

Addresses causes and corrections for the generator overheating.

12.9 Auto Stop After Cooling

Explains issues related to the thermal cut-out switch and restarting.

13. Maintenance

13.1 Electrical Component Maintenance

States electrical components are maintenance-free, requiring only dust removal.

13.2 Engine Maintenance

Covers engine maintenance tasks including oil, filters, and spark plugs.

13.2.1 Fuel Tank & Lines Check

13.2.2 Motor Oil Change & Level Check

13.2.3 Spark Plug Maintenance

13.2.4 Air Filter Cleaning & Replacement

13.3 Generator Exchange

14. Optional Accessories

14.1 Carriage Assembly

Details the assembly of the carriage, including wheels, feet, and handles.

14.2 Exhaust Hose Adapter

Describes how to mount the exhaust hose adapter.

Metallwarenfabrik Gemmingen Geko 2801 E-A/MHBA Specifications

General IconGeneral
Voltage230 V
Frequency50 Hz
Fuel Tank Capacity15 l
Starting SystemRecoil
Fuel TypeGasoline

Related product manuals