MetalTech BuildMan I-BMDS1830 User Manual

1
YEAR
WARRANTY
Picture may differ from actual product
OPERATIONAL SAFETY
AND ASSEMBLY INSTRUCTIONS
THE STILTS ARE FOR PROFESSIONAL USE ONLY!
WE WILL NOT BE HELD RESPONSIBLE FOR ANY ACCIDENT
RESULTING FROM IMPROPER USE, IRRESPONSIBLE USE, OR
FAILURE TO INSPECT AND ADEQUATELY MAINTAIN ACCORD-
INGLY. THIS IS THE SOLE RESPONSIBILITY OF THE USER.
This manual gives imperative information on appropriate
operations and maintenance. Each exertion has been made to
guarantee the precision of this manual. These guidelines are
not intended to cover each conceivable condition and
circumstance that may happen. We reserve the right to change
this product at any time without prior notice.
IT IS VITAL THAT STILTS BE ASSEMBLED PROPERLY AND
ADJUSTED ACCORDING TO PERSONAL SIZE AND PREFER-
ENCE. ADDITIONALLY, IT IS CRITICAL TO PROPERLY KEEP
UP THE GOOD CONDITION OF YOUR STILTS AND TO FULLY
EXAMINE YOUR STILTS BEFORE EVERY USE, ENSURING ALL
FASTENERS; BOLTS, NUTS, WING NUTS AND SCREWS ARE
TIGHT. IT IS YOUR RESPONSIBILITY TO READ, UNDERSTAND
AND FOLLOW THESE INSTRUCTIONS, AND TO ALWAYS
PRACTICE CAUTION UTILIZING STILTS. STILTS OUGHT TO BE
USED ONLY IF WORKING ON A LEVEL FLOOR, CLEAR OF ANY
OBSTRUCTIONS OR DEBRIS.
IF THERE’S ANY QUESTION ABOUT CONDITIONS BEING
SAFE OR UNSAFE, DON’T USE THIS PRODUCT!
WARNING!
READ ALL INSTRUCTIONS, WARNINGS IN THIS MAN-
UAL AND LABELS ON THE PRODUCT BEFORE USING
STILTS. IT IS YOUR RESPONSIBILITY TO READ,
UNDERSTAND AND FOLLOW THESE INSTRUCTIONS.
BROKEN OR MISSING PARTS?
DO NOT RETURN THE PRODUCT TO THE RETAILER FROM
WHICH IT WAS PURCHASED – PLEASE CONTACT OUR
CONSUMER SERVICE DEPARTMENT.
If you experience a problem, have any questions concerning
the assembly or use of this product or need replacement
parts, please contact our customer service:
1 800 363-7587 / 450-681-6440 / CS@METALTECH.CO
MODELS:
I-BMDS1830
I-BMDS2440
FRANÇAISESPAÑOL
ENGLISH

MetalTech BuildMan I-BMDS1830 Specifications

General

Brand	MetalTech
Model	BuildMan I-BMDS1830
Category	Ladders
Language	English

Summary

OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS

WARNING! General Safety Information

Crucial safety information and user responsibility for reading instructions.

Professional Use Only Disclaimer

Specifies intended users and disclaims responsibility for improper use.

Broken or Missing Parts Procedure

Guidance for handling issues, directing users to customer service.

OPERATIONAL SAFETY

Electrical and Overload Warnings

Warns about electrical hazards and the maximum weight capacity of the stilts.

Key Operation and Safety Guidelines

Comprehensive rules for safe operation, including pre-use checks, movement, and work area conditions.

RULES FOR USE AND NON-USE OF STILTS

Approved Light Duty Tasks

Outlines specific light-duty tasks for which the stilts are appropriate.

Prohibited Use Scenarios

Details conditions and scenarios where the stilts should not be used.

STILTS ASSEMBLY

Required Tools for Assembly

Lists the necessary tools for assembling the stilts.

Assembly Procedures

Covers side poles and heel cup assembly instructions.

Adjustment Procedures

Covers height and sideways adjustment procedures.

STILTS ADJUSTMENT AND MAINTENANCE

Fastening Safety Straps

Instructions on how to properly fasten and secure all straps on the stilts.

Forward-Backward Stability Adjustment

How to adjust straps and springs to maintain forward-backward balance.

Sideways Balance Adjustment

Steps to adjust sideways position for calf support and knee comfort.

HEIGHT ADJUSTMENT

Cleaning and Daily Inspection

Procedures for cleaning and inspecting the stilts for wear and damage.

Proper Storage Guidelines

Guidelines for storing the stilts properly to prevent damage.

REPLACEMENT PARTS

Replacement Parts Catalog

Lists available replacement parts and their corresponding part numbers for ordering.

One Year Limited Warranty