Need help?Do you have a question about the MetalTech BuildMan I-BMDWB18 and is the answer not in the manual?
General| Brand | MetalTech |
|---|---|
| Model | BuildMan I-BMDWB18 |
| Type | Workbench |
| Material | Steel |
| Color | Black/Red |
| Wheels | Yes |
Advises against using the equipment near power lines or electrical circuits.
Specifies maximum load for the bench, step-up, and top to prevent overload.
Covers health, environment, usage conditions, maintenance, and modification guidelines for safe operation.
Instructions to place the bench upside down and release the legs using latches.
Guide to unfold the unit and snap locking braces into position for stability.
Ensures finger levers are locked and pins engaged for safe operation before use.
Place bench upside down and pull finger levers to position B to unlock legs.
Press finger levers together to release the locking pins for leg movement.
Slide the legs to the desired height, ensuring they are even.
Release levers, verify pins are engaged, and push levers back to secure.
Component kit for the step-up functionality of the drywall bench.
Includes the main leg component with attached foot.
Replacement rubber feet for the bottom of the bench legs.
Protective covers for the bench leg feet.
Parts for the locking mechanism involving finger levers.
Components for the locking braces that secure the bench.
Provides customer service phone number and email for assembly help or issues.
Advised to keep the manual and original sales invoice in a safe, dry place.
Details warranty coverage against material defects and exclusions for damage.
To Next Page