MetalTech JOBSITE I-IDS1830 User Manual

1
YEAR
WARRANTY
Picture may differ from actual product
OPERATIONAL SAFETY
AND ASSEMBLY INSTRUCTIONS
THE STILTS ARE FOR PROFESSIONAL USE ONLY!
WE WILL NOT BE HELD RESPONSIBLE FOR ANY ACCIDENT
RESULTING FROM IMPROPER USE, IRRESPONSIBLE USE, OR
FAILURE TO INSPECT AND ADEQUATELY MAINTAIN ACCORD-
INGLY. THIS IS THE SOLE RESPONSIBILITY OF THE USER.
This manual gives imperative information on appropriate
operations and maintenance. Each exertion has been made to
guarantee the precision of this manual. These guidelines are
not intended to cover each conceivable condition and
circumstance that may happen. We reserve the right to change
this product at any time without prior notice.
IT IS VITAL THAT STILTS BE ASSEMBLED PROPERLY AND
ADJUSTED ACCORDING TO PERSONAL SIZE AND PREFER-
ENCE. ADDITIONALLY, IT IS CRITICAL TO PROPERLY KEEP
UP THE GOOD CONDITION OF YOUR STILTS AND TO FULLY
EXAMINE YOUR STILTS BEFORE EVERY USE, ENSURING ALL
FASTENERS; BOLTS, NUTS, WING NUTS AND SCREWS ARE
TIGHT. IT IS YOUR RESPONSIBILITY TO READ, UNDERSTAND
AND FOLLOW THESE INSTRUCTIONS, AND TO ALWAYS
PRACTICE CAUTION UTILIZING STILTS. STILTS OUGHT TO BE
USED ONLY IF WORKING ON A LEVEL FLOOR, CLEAR OF ANY
OBSTRUCTIONS OR DEBRIS.
IF THERE’S ANY QUESTION ABOUT CONDITIONS BEING
SAFE OR UNSAFE, DON’T USE THIS PRODUCT!
WARNING!
READ ALL INSTRUCTIONS, WARNINGS IN THIS MAN-
UAL AND LABELS ON THE PRODUCT BEFORE USING
STILTS. IT IS YOUR RESPONSIBILITY TO READ,
UNDERSTAND AND FOLLOW THESE INSTRUCTIONS.
BROKEN OR MISSING PARTS?
DO NOT RETURN THE PRODUCT TO THE RETAILER FROM
WHICH IT WAS PURCHASED – PLEASE CONTACT OUR
CONSUMER SERVICE DEPARTMENT.
If you experience a problem, have any questions concerning
the assembly or use of this product or need replacement
parts, please contact our customer service:
1 800 363-7587 / 450-681-6440 / CS@METALTECH.CO
MODELS:
I-IDS1830
I-IDS1830QP
I-IDS2440
FRANÇAISESPAÑOL
ENGLISH

MetalTech JOBSITE I-IDS1830 Specifications

General

Brand	MetalTech
Model	JOBSITE I-IDS1830
Category	Construction Equipment
Language	English

Summary

Operational Safety and Assembly Instructions

General Safety Warnings and User Responsibility

Crucial safety alerts and user responsibilities before operating the stilts, including warnings about proper use and conditions.

Broken or Missing Parts and Support

Instructions for handling damaged or missing components and contact information for customer service.

Detailed Operational Safety Guidelines

Critical Safety Precautions

Essential warnings regarding electrical hazards, overloading, and the importance of understanding all instructions.

Safe Operation Practices

Comprehensive list of numbered instructions for safe usage, operator condition, and work area preparation.

Rules for Stilt Usage

Approved Light Duty Tasks

List of recommended light-duty tasks suitable for using the stilts, such as insulation and sanding.

Prohibited Usage Scenarios

Conditions and situations where the use of stilts is explicitly forbidden or unsafe, like on stairs or uneven surfaces.

Stilts Assembly and Adjustment

Tools Needed for Assembly

List of necessary tools required for assembling the stilts, including wrenches and screwdrivers.

Side Poles Assembly Procedure

Step-by-step instructions for assembling the side pole components of the stilts.

Heel Cup Installation and Fit

Guide for installing and adjusting the heel cup to fit the user's shoe and leg alignment.

Height Adjustment Mechanism

Procedures for setting the correct working height of the stilts by adjusting the upper and lower poles.

Sideways Alignment Adjustment

Steps for adjusting the sideways alignment of the stilts for proper posture and knee alignment.

Stilts Adjustment and Maintenance

Strap Fastening Procedure

Instructions on how to properly fasten calf, ankle, and toe straps for secure and comfortable wear.

Balancing: Forward-Backward Stability

Guidance on adjusting components like leg cuffs and springs for improved forward and backward weight balance.

Balancing: Sideways Adjustment

Steps to adjust the sideways alignment of the leg cuffs to prevent knee pressure and ensure comfort.

Continued Adjustment, Cleaning, and Storage

Fine-Tuning Height Adjustment

Detailed steps for final height adjustment, ensuring knobs are tight and both stilts are at the same height.

Cleaning and Inspection Routine

Daily inspection guidelines for wear and tear, and cleaning procedures for parts and moving components.

Proper Storage Recommendations

Instructions for storing the stilts in a dry location to prevent damage or bending.

Replacement Parts and Hardware

Genuine Replacement Parts List

Catalog of genuine quality replacement parts with part names and numbers for ordering.

Customer Service for Parts

Contact information for customer service to order replacement parts or inquire about them.

Product Warranty Information

One Year Limited Warranty Details

Guarantees against material defects, with instructions for returns and conditions not covered.

Contact and Manufacturer Information

Company contact details, website, and manufacturing origin information.