Need help?Do you have a question about the Meteo Control blue’Log X Series and is the answer not in the manual?
General| Brand | Meteo Control |
|---|---|
| Model | blue’Log X Series |
| Category | Data Loggers |
| Language | English |
Explains how to avoid dangers when using devices and classifies safety instructions by risk severity.
Specifies permitted signals and signal strengths and indoor installation requirements.
States that installation and maintenance must be performed by qualified electricians.
Outlines protection measures like not removing the memory card or modifying the device.
Details the components and connections on the front panel of the blue'Log device.
Warns about electrocution and damage due to improper wiring or overvoltage during installation.
Provides step-by-step instructions for mounting the blue'Log device on a DIN rail.
Details the process of opening the casing and attaching an expansion module to the blue'Log.
Details voltage/current requirements and device protection methods for the power supply.
Explains protection measures for power supply, including fuses and disconnectors.
Ensures the device is securely mounted and cables are correctly connected before commissioning.
Outlines the steps for system start-up: switching power on and waiting for boot completion.
Explains connecting devices like inverters via RS485/422 interfaces.
Guides on connecting devices like sensors via digital and analog inputs.
Covers network settings, including DHCP activation for automatic IP address assignment.
Details activating DHCP for automatic network parameter reception from a DHCP server.
Guides on setting static network parameters like IP address, subnet mask, and DNS server.
Guides on adding and configuring sensors through the device website interface.
Details how to add and configure meters, such as the SO energy meter, via the device website.
Explains the process of adding and scanning inverters via the device website.
To Next Page