Need help?Do you have a question about the meteocontrol BLUE LOG XM and is the answer not in the manual?
General| Operating Temperature | -20°C to +60°C |
|---|---|
| Enclosure protection | IP20 |
| Weight | 500 g |
| Communication Interfaces | Ethernet, RS485, USB |
| Protocols | Modbus |
Describes power, device, and online status LEDs for monitoring.
Details directional pad, OK, ESC, and reset buttons for device operation.
Lists USB, RJ45, RS485, and CAN interfaces for data and communication.
Specifies voltage output, power supply, and digital input/output capabilities.
Describes the display, rail latch, and side covers for mounting and expansion.
Explains bus termination settings for RS485 and CAN interfaces.
Provides instructions for wall mounting the device using screws, ensuring proper attachment.
Specifies voltage and current limits for powering the blue'Log safely.
Guides on connecting external devices, referring to compatibility lists and manufacturer instructions.
Details network configuration steps via web browser for initial access and setup.
Describes the device display and graphical user interface elements.
Guides on accessing the blue'Log via a web browser using IP address or hostname.
Explains the initial setup of user credentials like username, password, and PIN.
Explains the 'Support Access' feature and its impact on remote serviceability.
Details checking for firmware updates and setting the correct time zone for the device.
Guides registration via the web interface, setting system key, user, and password.
Details registering the logger in VCOM using hardware number, username, and password.
Informs about data collection, storage on SD card, and transfer for VCOM information.
To Next Page
