EN
7
INTRODUCTION
The VM128 is a non-destructive moisture meter for hard
materials and materials that cannot be damaged, such
as concrete, cement, wood and other building materials.
The VM128 is also suitable for determining damp spots in
oors, walls and ceilings.
The VM128 is particularly suitable for determining whether
a surface is suitable for covering or painting. The VM128
is equipped with an alarm function. This can be measured
quickly and e ectively. Very useful for larger surfaces.
SAFETY INSTRUCTIONS
• Read the operating instructions before use.
• It is only allowed to open the instrument for chang-
ing the batteries.
• We cannot be held liable for damage caused by the
use of this instrument.
• Liability for the correctness of the measured values
is excluded.
• We do not accept any liability for consequential
damage arising from this.
• Do not use on a metal surface.
• The instrument must not be exposed to high tem-
peratures, strong vibrations or high humidity.
• The instrument meets the EMC and CE require-
ments.
• Always keep out of the reach of children or animals
INDEX
INTRODUCTION--------------------------------------------------- 7
SAFETY INSTRUCTIONS----------------------------------------- 7
IDENTIFICATION-------------------------------------------------- 8
MAINTENANCE---------------------------------------------------- 9
SPECIFICATIES----------------------------------------------------- 9
FUNCTIES------------------------------------------------------------ 9
METINGEN---------------------------------------------------------- 10
REFERENTIE- EN MATERIAALTABEL------------------------ 11
Thank you for purchasing a LEVELFIX instrument.
To make full use of all of your instruments functions, please read this user
manual carefully.
To Next Page
Loading...
Need help?
General
