Metra Electronics 99-5720 User Manual

KIT COMPONENTS
KIT FEATURES
Shaft and
DIN unit
provisions
Various
mounting depth
alternatives
Incorporates
factory climate
controls into
installation
APPLICATIONS
CAR PAGE
FORD
Escort 1997-04
Escort ZX2 1998-04
MERCURY
Tracer 1997-99..................................1-3
* Note: Metra’s 70-5720 must be used on 2003-04 Zx2 and Escort Models
TOOLS REQUIRED
Cutting tool
Torx-head screwdriver
86-5618 - Head unit
removal keys
99-5720
INSTALLATION
INSTRUCTIONS
3
DIN HEAD UNITS:
Slide
the DIN cage into the Integrated
Mounting Kit
and secure by bending
the metal locking tabs
down. Slide the aftermarket head unit into the cage until secure. (see Fig. B)
7
Fig. B
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-07 METRA ELECTRONICS CORPORATION
Rev. 12-21-07
6
Locate the factory wiring harness in the
dash. Metra recommends making
connection
s as shown using the
supplied wire harness. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
Right Front + ...............Gray
Right Front - ................Gray/Black
Left Front + ..................White
Left Front - ...................White/Black
Right Rear + .................Violet
Right Rear - ..................Violet/Black
Left Rear + ...................Green
Left Rear - ....................Green/Black
12 Volt Power................Red
Memory..........................Yellow
Ground..........................Black
Power
Antenna.............Blue
Dimmer..........................Orange/White
Amp Turn-On................Blue/White
NOTE: Ground head unit to vehicle
Speaker
Harness
Integrated
Mounting Kit
ZX2 2003-04*......................................1-3

Metra Electronics 99-5720 Specifications

General

Brand	Metra Electronics
Model	99-5720
Category	eBook Reader
Language	English

Summary

Kit Overview and Applications

Kit Features

Highlights the kit's capabilities including shaft, DIN unit provisions, mounting depth, and climate control integration.

Vehicle Applications

Lists compatible vehicle models and years for the installation kit, including Ford Escort and Mercury Tracer.

Kit Components and Tools

Details the included kit components and lists the necessary tools for the installation process.

Wiring and Head Unit Installation

Factory Wiring Harness Connections

Provides color-coded wiring guide for connecting the aftermarket head unit to the factory harness.

DIN Head Unit Mounting

Instructions on sliding the DIN cage into the mounting kit and securing the aftermarket head unit.

Climate Control Unit Installation Steps

Initial Disconnection and Panel Removal

Disconnects the battery and guides removal of the factory radio/climate control panel from the dash.

Climate Control Dial and Switch Transfer

Details disassembling climate controls and re-mounting switches and dials onto the integrated kit.

Sub-dash Modification

Instruction to cut and remove a specific portion of the sub-dash lip for proper fitment.

Final Wiring and Assembly

Guides making wiring connections to the kit and snapping the assembly into the dash.