Metra Electronics 99-9600 - Kit Assembly and Radio Provision; ISO DIN Radio Provision

ISO DIN radio provision
(Figure A) (Figure B)
1. Slidetheradiointoradiohousing
andsecurewithscrewssupplied
withtheradio.(FigureA)
2. Slidetherubbergasketoverthe
frontedgeoftheradiohousing.
(FigureA)
3. Inserttheradioandkitassembly
intothefactoryradioopeningfrom
thebacksideoftheinnerfairing.
(FigureB)
4. Securewiththefactoryhardware,
ortheincludedbutton-head
screws.(FigureB)
5. Locatethefactorywiringharness
andantennapluginthedash.
Metrarecommendsusingthe
propermatingadapters.Usethe
includedwiringharness.The
AXXESSASWC-1interfaceissold
separatelyforretentionoffactory
handlebarcontrols.
6. Reassemblebikeinreverseorder
ofdisassembly.
Optional
spacers if
needed
Kit Assembly 99-9600