www.portableappliancetesters.com.au/support
1. Scroll down the main menu to Setup and press the Test button on the Delta
2. Scroll to Communication then press Test
3. Set the Printer to Zebra BT (there is no Godex option)
4. Select the PRN Name option and press Test, the unit will scan for available printers and if the Godex
printer is on you should see ZebraPRN appear.
5. Select it and you should now see PRN Name: ZebraPRN appear
01. CONFIGURING THE METREL DELTA & GODEX PRINTER
To Next Page
Loading...
General