Metrix ST5484E - Page 11

Doc# M9162• REV AB (April 2019) Page 11 of 12
10. SPECIFICATIONS, ORDERING INFORMATION AND OUTLINE
DIMENSIONAL DIAGRAMS
Refer to Metrix product datasheet 1004457 for addional informaon.
Figure 1: Outline dimensions of the ST5484E (all
versions except MIL-Style Connector). Dimen-
sions in mm [inches]. Oponal* 8200-001 conduit
elbow shown installed.
* NOTE: 8200-AAA-IEC elbow is mandatory for
ATEX/IECEx/INMETRO Ex d (ameproof) ap-
proved installaons.
Figure 2: Outline dimensions of the
ST5484E-XXX-XX4-XX (MIL-Style Connector).
Dimensions in mm [inches].