Metro DataVac DATA-VAC/2 - Toner Starter Kit and Filter System; Toner Starter Kit Usage; Toner Filter System Caution; Removing Toner Filter System

1.
DATA-VAC
Computer Maintenance Guide
INSTRUCTIONS FOR USE OF TONER STARTER KIT
AND TONER BAGS/FILTERS
OPEN CLAMPS, REMOVE FRONT DOME FROM METRO DATA-VAC/2
(MODEL MDV-2), METRO DATA-VAC/3 (MODEL MDV-3).
REMOVE PAPER DISPOSABLE BAG, PERMANENT CLOTH BAG AND FOAM
FILTER.
SECURELY INSERT SPECIAL GREEN MICRO FILTER IN PLAGE.
PLACE PERMANENT CLOTH BAG BACK INTO UNIT.
. FIT RUBBER DIAPHRAGM OF SPECIAL TONER FILTER BAG ONTO PLASTIC TUBE
LOCATED INSIDE FRONT DOME.
REPLACE FRONT DOME ONTO DATA-VAC AND SECURE WITH CLAMPS.
USE
SPECIAL
ACCESSORIES,
PACKED
WITH
TONER
STARTER
KIT
(MODEL
TSK-
1), FOR TONER PICK-UP.
CAUTION
DO
NOT
USE
DV-5PB
(PAPER
BAG)
FOR
TONER
PICK-UP
—
HARMFUL
TONER
COULD
BE
EXHAUSTED
INTO
EXPENSIVE
EQUIPMENT
OR ROOM
CAUSING
IRREPARABLE
DAMAGE.
мо oa р
ТО REMOVE TONER FILTER SYSTEM
OPEN
CLAMPS,
REMOVE
FRONT
DOME
FROM
METRO
DATA-VAC/2
(MODEL
MDV-2),
METRO
DATA-VAC/3
(MODEL
MDV-3).
PLACE PRESSURE SENSITIVE TONER SEAL (FOUND ON CARDBOARD RING)
OVER RUBBER DIAPHRAGM OF TONER FILTER BAG.
REMOVE TONER FILTER BAG AND DISCARD.
REMOVE CLOTH BAG.
REMOVE MICRO FILTER (GREEN) AND DISCARD.
REPLACE WITH NEW GREEN OR FOAM FILTER.
REPLACE
WITH
TONER
FILTER
BAG
(FOR
TONER
PICK-UP)
OR
DV-5PB,
PAPER
DISPOSABLE
BAG
FOR
STANDARD
CLEANING.
CHECK
BAG
FREQUENTLY.
DISCARD
WHEN
NO
MORE
THAN
HALF
FULL.
TSK/TBF/1105