EasyManua.ls Logo

Metro DataVac GHS1120 - User Manual

Metro DataVac GHS1120
90 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GHS1120
GHS1150
COOLING TOP VITRINE
{ GEBRAUCHSANWEISUNG
Original-Betriebsanleitung
t INSTRUCTION MANUAL
Original instructions
s MODE D’EMPLOI
Traduction de la notice originale
Q INSTRUCŢIUNI DE UTILIZARE
Traducerea instrucţiunilor
originale
| KEZELÉSI ÚTMUTATÓ
Az eredeti használati utasítás
fordítása
j VOD K POUŽITÍ
eklad originálního návodu
W VOD K POUŽITIU
Preklad originálneho návodu
~ ISTRUZIONI PER L’USO
Traduzione delle istruzioni originali
} MANUAL DE INSTRUCCIONES
Traducción de las instrucciones
originales
MANUAL DE INSTRUÇÕES
Tradução das instruções originais

Questions and Answers

  • R
    Ryan DavisAug 11, 2025
    What to do if my Metro DataVac GHS1120 appliance does not operate?
    • Z
      Zachary EnglishAug 11, 2025
      If your Metro DataVac Indoor Furnishing appliance isn't working, there are several things to check: * Ensure the power plug is securely connected to an electrical outlet. * If the supply cord is damaged, have it replaced by a qualified technician. * Make sure the on/off switch is set to ON. * Verify the control panel is set correctly as described in the manual. * Allow the defrost process to finish completely if the appliance is in defrost or dripping phase. * Defrost the appliance if the evaporator is covered with frost. * Clean the condenser if it's blocked with dust. * Move the appliance away from heat sources. * Unblock the airflow of the condenser by removing any obstacles. * Reorder the contents to allow the appliance to close properly.
  • L
    Larry MontesAug 17, 2025
    Why is my Metro DataVac GHS1120 Indoor Furnishing appliance abnormally noisy?
    • E
      Erik HillAug 17, 2025
      An abnormally noisy Metro DataVac Indoor Furnishing appliance can be caused by a couple of things. First, check for loose screws or bolts on the frame and tighten them. Second, ensure the appliance is in a stable position and properly leveled by adjusting the leveling legs.
  • B
    Bryan NicholsonAug 23, 2025
    What to do if my Metro DataVac GHS1120 Indoor Furnishing appliance leaks water?
    • S
      Susan LopezAug 23, 2025
      If your Metro DataVac Indoor Furnishing appliance is leaking water, it could be due to a few reasons. The water collection container or evaporation device might be damaged and need professional repair. Alternatively, the defrost water outlet might be blocked; try removing any obstructions. Lastly, ensure the appliance is properly leveled by adjusting the leveling legs.
  • D
    David MartinAug 28, 2025
    What to do if my Metro DataVac GHS1120 Indoor Furnishing appliance is overloaded?
    • A
      Alan AndersonAug 29, 2025
      If your Metro DataVac Indoor Furnishing appliance is overloaded, filled with hot food, or filled in a way that prevents proper closing, remove several items, take out hot foodstuffs, or reorder the contents to allow proper closing.
  • M
    Mrs. Ruth ChoiSep 4, 2025
    What does alarm code EO mean on my Metro DataVac Indoor Furnishing appliance?
    • K
      Kimberly JohnsonSep 4, 2025
      The alarm code EO on your Metro DataVac Indoor Furnishing appliance indicates a technical error that requires attention from the manufacturer or an authorized representative. Contact the retailer from whom you purchased the product.

Metro DataVac GHS1120 Specifications

General IconGeneral
BrandMetro DataVac
ModelGHS1120
CategoryIndoor Furnishing
LanguageEnglish