Made by
ALL Engineering
Technical specs :
Working principle: Non oversampling dac. Two dacs per channel in
in differential mode.
Power supply: 15 VA
Power consumption: Standby < 0.5 Watts
Full operation 7 Watts
Power requirement: 110/115V AC or 220/230 V AC 60/50Hz
Inputs: 1x optical Toslink,1xcoaxial,1xAES/EBU and 1xUSB.
Outputs: 2x RCA gold plated Neutrik © connectors . 2x XLR 3
balanced outputs.
Output voltage: RCA : 2 Volts RMS max output.
XLR: 4 Volts RMS max output
Frequency response: 1Hz -0.8dB, 20 kHz -1.5 dB 44.1kHz sampling.
1Hz -0.8dB, 65 kHz -3dB 192-384 kHz sampling.
Distortion: 0,006 % THD
Noise: -145 dB related to 2 Volt RMS
Output impedance: RCA 100 Ohms , XLR 100 Ohms
Sampling frequency: Optical : 44.1 - 96 kHz sampling ,16 or 24 bits.
Coaxial: 44.1 - 192 kHz sampling, 16 or 24 bits.
USB: 44.1- 384 kHz sampling , 16 or 24 bits
Dimensions hxwxd: 60 x 290 x 250 mm.
Weight: 3100 gram.
Subject to change without notice.
Metrum Acoustics
Ambachtsweg 4K
3953BZ Maarsbergen
The Netherlands
Tel: +31 (0)343437331
Email: info@metrumacoustics.nl
Website: http://www.metrumacoustics.nl
To Previous Page
Loading...