Need help?Do you have a question about the Mettler Toledo IND360 POWERCELL and is the answer not in the manual?
General| Brand | Mettler Toledo |
|---|---|
| Model | IND360 POWERCELL |
| Category | Touch terminals |
| Language | English |
Connects PLC and IND360 via Ethernet cable for system setup.
Instructions on opening sample code in TIA Portal for IND360 integration.
How to change the project's editing and reference languages.
Guidance on choosing the appropriate PLC model from sample projects.
Reads real-time weighing data like weight value and status bits.
Monitors heartbeat bit for device communication status.
Reads critical real-time diagnostic data from load cells.
Reads current scale capacity and increment values.
Configures new scale capacity and increment values.
Performs zero calibration before other adjustments.
Performs linearity span adjustment after zero calibration.
Calibrates scale without test weights using rated capacity.
Reads individual load cell weight for distribution monitoring.
Monitors scale overload, missing load cells, and network failures.
Steps for configuring hardware in the Profinet network.
Configuration settings for the PLC, including system memory.
Procedures for duplicating necessary program blocks and data.
To Next Page