Need help?Do you have a question about the Metz Talio 32 FHDTV 100 CTS2 Z and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LCD |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Smart TV | Yes |
| Refresh Rate | 100 Hz |
| Operating System | Android TV |
| Energy Efficiency Class | A |
| Resolution | 1920 x 1080 |
Explains the correct usage guidelines for the TV set in various environments.
Provides instructions for connecting power and antenna, and initial switch-on.
Covers storing and selecting up to 2000 TV and radio stations.
Instructions for navigating and selecting stations using the station table.
Describes how to switch between the two most recently selected stations.
Instructions on how to activate the Teletext feature.
How to navigate and control Teletext pages once displayed.
How to set up automatic programme changes for connected AV devices.
Details the VCR function for optimizing picture quality from tape devices.
Explains how to reduce digital picture faults using MPEG noise reduction.
Describes how to correct colour shifts using the UV Shift menu option.
Instructions for setting the picture format for AV playback.
Explains how to use noise reduction to improve picture quality from AV devices.
Steps to access and adjust the general picture settings menu.
Details the three different power options (Eco, Presentation, Picture Quality).
Explains how to adjust backlighting settings based on different power options.
Guide to adjusting and creating custom picture profiles.
How to assign pre-configured picture profiles to programme positions.
Instructions on adjusting the border colour for pictures displayed in different aspect ratios.
How to set picture zoom and panorama modes for optimal viewing.
Steps to access and adjust the general sound settings menu.
Guide to activating and configuring the SRS-WOW audio enhancement feature.
Explains automatic volume correction to balance sound levels between stations.
Instructions on how to adjust the equalizer settings for personalized audio.
Details settings for base width and spatial sound when SRS WOW is off.
How to adjust volume correction for individual programmes.
Guide to setting the tone to 'Normal' or 'Speech' for programmes.
Explains how to force mono sound output for programmes.
Steps to configure the Hi-Fi output settings for audio devices.
Steps to activate the childlock feature and set a password.
How to exempt specific programmes from the childlock function.
How to set a permitted time period for viewing with childlock active.
Instructions on securing childlock settings with a personal code.
Procedure for disabling the childlock function.
Steps to set the desired time for a reminder notification.
Instructions for setting the automatic switch-on and switch-off times.
Step-by-step instructions for manual time and date configuration.
Instructions for configuring recording lead and overrun times.
Details how to activate and use the Picture-in-Picture (PIP) feature.
Step-by-step guide to enable and configure the PIP function.
Temporarily select 'Normal' or 'Speech' sound settings.
Instructions for viewing JPEG photos using the TV's image viewer.
Steps to connect storage media and launch the photo viewer.
How to activate and use the zoom function for image viewing.
Instructions on how to start and configure a slideshow of photos.
Explains the time shift mode for pausing and replaying live TV.
Guide to setting timers for recording programmes.
Steps for manually programming a recording timer.
Instructions on how to delete programmed timers.
How to start a direct (one-touch) recording of the current programme.
Instructions for adjusting the picture format for optimal display.
Steps to select and adjust picture formats like 16:9 and 4:3.
How to expand 4:3 programmes to fill a 16:9 screen.
Function to display external 16:9 sources with the correct aspect ratio.
How to adjust the vertical picture position for better subtitle visibility.
Steps to shift the picture up or down on the screen.
How to select different audio channels or languages for programmes.
Steps to assign specific functions to the remote control's programmable keys.
Instructions on how to enable and set up the EPG service.
Information on receiving NexTView details for EPG data.
Specific instructions for EPG data collection with a single receiver.
Instructions for EPG data collection with a dual receiver setup.
Important notes regarding channel table configuration for EPG.
How to customize the EPG by excluding specific channels.
Provides the first method for excluding channels from the EPG.
Provides the second method for customizing channel inclusion in the EPG.
How to sort the EPG display by station list.
How to sort the EPG display by timetable.
How to sort all programmes in the EPG by time.
Instructions for selecting a programme from the EPG.
How to navigate through EPG pages.
How to watch a selected programme or set a reminder.
How to scroll through the EPG by time.
How to change the current TV station using the EPG and green button.
How to select programmes in the EPG by entering a specific time.
Select all available programmes in the EPG using the blue button.
Set user interests or select programmes based on interests in the EPG.
Navigate EPG time/stations using white button with F1/F2.
Navigate EPG time/stations backwards using green button with F1/F2.
Mark a selected programme for recording using the red button.
Return to the TV picture display from the EPG.
Navigate EPG by day using the – / + buttons.
How to select, watch, or set reminders for programmes using the EPG.
How to set areas of interest within the EPG guide.
How to choose the desired language for the TV menu and display texts.
How to set the country for proper channel and basic setting configuration.
Combined steps for setting both menu language and country.
How to select the appropriate reception mode (Analogue, DVB-T, DVB-C, DVB-S).
Steps to configure the TV standard for analogue channels.
Focuses on terrestrial station search for analogue TV.
How to perform an automatic search for terrestrial analogue TV stations.
Step-by-step guide to initiate a terrestrial station search.
How to manually set the colour standard for analogue channels.
Steps to select the correct colour standard for optimal picture quality.
Steps to turn the antenna supply voltage on or off.
How to perform an automatic search for DVB-T stations.
Step-by-step guide to initiate an automatic DVB-T station search.
How to manually search for DVB-T stations using channel or frequency.
Step-by-step guide to perform a manual DVB-T station search.
Step-by-step guide to initiate an automatic DVB-C station search.
Step-by-step guide to perform a manual DVB-C station search.
Details the different antenna system settings for satellite reception.
Describes the 'Normal' antenna setting for satellite receivers.
Explains the 'Tandem' setting for dual DVB-S receivers.
Details the 'Single Cable' system for DVB-S reception.
Describes the 'Unicable' system for satellite reception via a channel router.
Explanation of LNB voltage settings and line compensation.
Steps to enable or disable the DiSEqC system for satellite antenna control.
Steps to select and configure satellites, including LNB and symbol rates.
Steps to adjust search parameters like 'All', 'FTA only', or 'FTA (CI)'.
Step-by-step guide to initiate an automatic DVB-S station search.
Step-by-step guide to perform a manual DVB-S station search.
Steps to configure the data update function for stations.
How to select programme positions to view DVB info and signal quality.
Steps to manually set or change the station logo.
Step-by-step guide for managing individual station entries in the table.
Instructions for copying individual stations within the station table.
Instructions for moving individual stations within the station table.
Instructions for deleting individual stations from the station table.
Steps for managing blocks of stations in the table.
Details on configuring the initial programme position, including AV devices.
Setting the operating mode (TV, Radio, AV) for the initial programme.
Selecting a specific programme for the initial position based on the mode.
Steps to adjust display settings on the TV screen.
How to find, sort, and manage DVB radio stations.
Details on physical controls for the Axio model.
Details on physical controls for Talio and Puros models.
Details on physical controls for Linus and Sirius models.
Details on physical controls for the Primus model.
How to switch the TV on using the main power switch.
How to select programmes using the TV's physical buttons.
How to adjust the volume using the TV's physical buttons.
How to adjust the contrast using the TV's physical buttons.
Describes the basic operation mode with limited menu access.
Covers configuring TV usage to a certain degree, with more functions available.
The advanced operation scope for users interested in full TV functionality.
Steps to select and save the desired operational scope for the TV.
Guidelines for proper cleaning methods and precautions.
Procedure for removing the front glass on Primus models for cleaning.
Procedure for removing the front glass on Sirius models for cleaning.
Specific advice on cleaning the front glass.
Steps to register an AV device by selecting it and setting signal types.
Details about connecting devices using FBAS signal type.
Details about connecting devices using YC signal type.
Details about connecting devices using RGB signal type.
Details about connecting devices using YUV signal type.
Details about connecting devices using HDMI interface.
Details about connecting devices using DVI-A or DVI-D interfaces.
How to register a Data Logic video recorder for TV interaction.
Steps to register a Data Logic video recorder and connect it.
How to transfer station data from TV to video recorder using Data Logic.
How to adjust Data Logic modes (Mode 1/Mode 2) to resolve recording issues.
How to set the signal type to RGB for AV devices.
Steps to change the signal type for AV devices, e.g., from Composite Video to RGB.
How to set the signal type to DVI or HDMI for AV devices.
Steps to configure the signal type for DVI or HDMI connections.
How to set the signal type to YUV for AV devices.
Steps to configure the signal type for YUV component connections.
Steps to register a Hi-Fi amplifier/AV receiver in the TV's AV device menu.
How to configure sound settings for connected Hi-Fi units.
Steps to disconnect and remove an AV device from the TV.
Steps to set up a direct recording for copying content between devices.
Steps to configure the VGA to DVI-A signal type for PC connection.
Steps to configure the DVI-D to HDMI signal type for PC connection.
Term defining vertical picture adjustment for subtitle visibility.
Definitions of standard, sports, brilliant, games, PC monitor, and user picture profiles.
Explanation of the four-digit code for childlock protection.
Term for automatic adjustment to picture sharpness.
Definition of the function that expands programmes to fill the screen.
Explanation of AV device connection sockets and their designations.
Term defining spatial distance adjustment for stereo sound.
Definition of motion compensation for black and white or cinema movies.
Definition of motion compensation for studio recordings like news.
Term for automatic adjustment to picture contrast.
Explanation of fine-tuning during station search for synchronization.
Definition of backlighting level based on room light conditions.
Explanation of screen burn-in effect and how to avoid it.
Definition of 'Normal' and 'Speech' tone settings for sound.
Explanation of automatic volume adjustment between stations.
Definition of default settings applied to all programmes.
Explanation of the SRS-WOW audio enhancement system.
Definition of the function to expand 4:3 format to 16:9 screen.
Definition of creating artificial stereo effects for mono sound.
Definition of improving picture quality affected by poor reception.
Explanation of symbol rate and its impact on station search.
Definition of the VCR function for optimal picture quality from tape devices.
Explanation of forcing mono sound output due to reception conditions.
Specifies the required mains voltage and frequency.
Details the antenna input specifications.
Lists the standard and special channel coverage ranges.
Specifies the acceptable operating temperature and humidity.
Information on the TV's energy consumption in different modes.
Table detailing power consumption in various modes for different TV models.
Lists supported video and audio signal standards (HDMI, DVI, Scart, etc.).
To Next Page
