Need help?Do you have a question about the Metz LCD-TV None and is the answer not in the manual?
Instructions for powering the TV set on from standby mode and switching it off.
Explains how to store and select TV/radio stations using numeric keys or the station table.
Accessing the AV playback menu and setting up automatic programme switching for AV devices.
Instructions for playing back content from AV devices without automatic voltage switching.
Configuring the VCR function for optimal picture quality during tape playback.
Accessing the picture settings menu and adjusting brightness as a general setting.
Adjusting the backlight control to 'dynamic' or 'automatic' for picture optimization.
Enabling or disabling the 'Picture improvement' feature for enhanced detail in dark scenes.
Configuring zoom, panorama modes, and aspect ratio for optimal screen filling.
Accessing the sound settings menu and adjusting general sound parameters.
Configuring the SRS-WOW audio system for enhanced sound experience.
Activating automatic volume correction to equalize volume levels between programmes and commercials.
Adjusting base width and spatial sound for improved stereo effects.
Setting up the childlock function to control TV usage and station access.
Protecting childlock settings with a code and deactivating the function.
Choosing the display language for all menu texts and help screens.
Setting the country to ensure correct basic settings like channel assignments.
Selecting the appropriate reception mode (Analogue TV, DVB-T, DVB-C) for the available signal.
Setting the correct TV standard and performing terrestrial station search for analogue TV.
Executing an automatic search for available terrestrial TV stations and managing the station table.
Manually selecting the colour standard for optimal picture quality.
Performing an automatic search for DVB-T stations, including search settings.
Manually searching for DVB-T stations by channel number or frequency.
Performing an automatic search for DVB-C stations, including symbol rate settings.
Manually searching for DVB-C stations by channel, frequency, or symbol rate.
Registering external AV devices and configuring signal types like RGB.
Registering the connected HiFi amplifier or AV receiver with the TV set.
Configuring search parameters (All, FTA only, FTA+CI) before DVB station search.
Performing an automatic DVB-S station search and managing the station table.
Manually searching for DVB-S stations by frequency, symbol rate, and polarization.
To Next Page
General
