Need help?Do you have a question about the Metz LCD-TV and is the answer not in the manual?
Setting the VCR function for optimal picture quality during playback from tape devices.
Making individual picture settings for specific programme positions using the TV menu.
Adjusting picture settings for programme positions using the station table.
Making individual sound settings for programme positions using the TV menu.
Adjusting sound settings for programme positions using the station table.
Manually setting the TV set's internal clock and date.
Setting lead time, overrun time, and VPS lead time for timer recordings.
Activating the Electronic Programme Guide function.
How the TV set collects Electronic Programme Guide data.
Navigating and interacting with the Electronic Programme Guide.
Selecting the correct TV standard for analogue station reception.
Automatically searching for available DVB-T TV and radio stations.
Automatically searching for available DVB-C TV and radio stations.
Configuring the signal type to RGB for AV devices.
Configuring the signal type to DVI or HDMI for AV devices.
Configuring the signal type to YUV for AV devices.
Removing registered AV devices from the TV set.
Identifying the various input and output sockets on the rear panel.
Illustrates the connection of a HiFi amplifier or AV receiver to the TV.
Information about digital upgrade kits for satellite reception.
Configuring the DiSEqC system for satellite antenna control.
Setting up the TV to receive signals from multiple satellites.
Performing an automatic search for DVB-S stations.
Performing a manual search for DVB-S stations by frequency.
Configuring the TV to save station data updates.
To Next Page
General
