Need help?Do you have a question about the Meyer Sound 700-HP and is the answer not in the manual?
General| Brand | Meyer Sound |
|---|---|
| Model | 700-HP |
| Category | Subwoofer |
| Language | English |
Guides users on how to effectively read and understand the operating instructions.
Details the key features and advantages of the 700-HP subwoofer.
Lists common scenarios and venues where the 700-HP subwoofer is used.
Explains the use of the 700-HP in TM Array configurations for specific sound events.
Describes the Intelligent AC power supply and its protective functions.
Specifies the safe operating voltage windows and potential damage from overvoltage.
Details proper grounding and AC distribution practices for system safety.
Explains current ratings and their importance for cable and breaker selection.
Illustrates correct wiring for power connectors (L6-20, IEC 309, VEAM) for safe operation.
Highlights critical electrical safety warnings, including proper outlet and cord usage.
Describes the balanced XLR input, impedance, and wiring specifications.
Explains the available cabling options and strain relief for connections.
Discusses the drivers, amplifier, and internal control functions of the 700-HP.
Explains Meyer Sound's TruPower limiting technology and its benefits.
Details the forced-air cooling system, including fans and airflow management.
Describes the user panel, LEDs, and buttons of the RMS communication module.
Explains the graphical user interface of the RMS software for monitoring.
Discusses augmenting systems with 700-HP subwoofers for enhanced low-frequency performance.
Details integration with Concert and UltraSeries loudspeakers for optimal system response.
Explains daisy-chaining 700-HP subwoofers with other loudspeakers for smooth frequency response.
Describes integrating the 700-HP with Meyer Sound's M Series linear and curvilinear arrays.
Recommends using the LD-3 for easy integration and optimization with M Series arrays.
Discusses deploying 700-HP subwoofers in combination with the 650-P subwoofer.
Advises on the use of DSPs with 700-HP subwoofers and potential phase shift issues.
Describes MAPP Online as a tool for predicting coverage, frequency response, and SPL.
Explains the SIM audio analyzer for acoustical system measurement and alignment.
Details the SIM's technique for statistically unpredictable excitation signals.
Lists various applications of the SIM audio analyzer, including system testing and alignment.
Describes the MRK-700 kit for attaching the 700-HP to the MTG-700 top grid.
Explains the MTG-700 top grid as a solution for flying 700-HP subwoofers in arrays.
Details the MCF-700 caster frame for transporting and ground-stacking 700-HP subwoofers.
Specifies installation angles and conditions for weather-protected 700-HP units.
Explains how to properly open and secure the rain hood for adequate cooling.
Provides step-by-step instructions for removing the amplifier module from the 700-HP.
Guides on how to correctly install a replacement amplifier module into the 700-HP.
Details the process for removing the amplifier from a weather-protected unit with a rain hood.
Outlines the steps for reinstalling both the amplifier and the rain hood.
Lists the acoustical performance parameters of the 700-HP subwoofer.
Details the specifications of the 18-inch low-frequency drivers used in the 700-HP.
Describes the input type, impedance, connectors, and wiring for audio signals.
Specifies the amplifier type, output power, and load capacity of the 700-HP.
Lists AC power connector types, voltage selection, and current draw specifications.
Describes the RMS network capabilities for monitoring amplifier parameters.
Details the physical construction, finish, rigging, dimensions, and weight of the 700-HP.
To Next Page
