Meyer EZ-Mount Classic - Standard Series Specifications; Steel Moldboard Specifications; Max Polyethylene Specifications

Models STP-7, STP-7.5
For 4x4 Standard Duty Pickups
and Sport Utility Vehicles
NOTE: STP-7 standard with 2 trip springs.
MAX POLYETHYLENE SPECIFICATIONS
SNOW PLOW MODEL STP-7 STP-7.5
MOLDBOARD LENGTH 7’ 7 1/2’
MOLDBOARD HEIGHT 27” 27”
MOLDBOARD GAUGE 3/8” 3/8”
Polyethylene Polyethylene
VERTICAL RIBS 4 4
NO. OF TRIP SPRINGS 2 3
CUTTING EDGE 3/8” x 6” 3/8” x 6”
PLOWING WIDTH 74” 79”
AT FULL ANGLE
SECTOR 11” 11”
POWER ANGLING RAMS 1 1/2” x 10” 1 1/2” x 10”
*AVERAGE PLOW 621 lbs. 660 lbs.
WEIGHT COMPLETE
Models ST-7, ST-7.5, STL-7.5
For 4x4 Standard Duty Pickups
and Sport Utility Vehicles
NOTE: ST-7 standard with 2 trip springs.
STEEL MOLDBOARD SPECIFICATIONS
SNOW PLOW MODEL ST-7 ST-7.5 STL-7.5
MOLDBOARD LENGTH 7’ 7 1/2’ 7 1/2’
MOLDBOARD HEIGHT 25” 25” 25”
MOLDBOARD GAUGE 12 12 14
VERTICAL RIBS 4 4 4
NO. OF TRIP SPRINGS 2 3 3
CUTTING EDGE 3/8” x 6” 3/8” x 6” 3/8” x 6”
PLOWING WIDTH 74” 79” 79”
AT FULL ANGLE
SECTOR 11” 11” 11”
POWER ANGLING RAMS 1 1/2” x 10” 1 1/2” x 10” 1 1/2” x 10”
*AVERAGE PLOW 580 lbs. 606 lbs. 469 lbs.
WEIGHT COMPLETE
STANDARD SERIES
13
*weight is based on average depending on specific mounting