Meyer EZ-Mount Classic - Contractor Series Specifications; Steel Moldboard Specifications; Max Polyethylene Specifications

Models CP-7.5, CP-8, CP-8.5, CP-9.0
For 4x4 Heavy Duty 3/4 ton, 1 ton Pickups,
and 1 ton Cab Chassis
MAX POLYETHYLENE SPECIFICATIONS
SNOW PLOW MODEL CP-7.5 CP-8 CP-8.5 CP-9.0
MOLDBOARD LENGTH 7 1/2’ 8’ 8 1/2’ 9’
MOLDBOARD HEIGHT 30” 30” 30” 30”
MOLDBOARD GAUGE 3/8” 3/8” 3/8” 3/8”
Polyethylene
VERTICAL RIBS 6 6 6 6
NO. OF TRIP SPRINGS 4 4 4 4
CUTTING EDGE 3/8” x 6” 1/2” x 6” 1/2” x 6” 1/2” x 6”
PLOWING WIDTH 79” 84” 88” 93”
AT FULL ANGLE
SECTOR 15” 15” 15” 15”
POWER ANGLING RAMS 1 1/2” x 10” 1 1/2” x 10” 1 1/2” x 10” 1 1/2” x 10”
*AVERAGE PLOW 791 lbs. 821 lbs. 840 lbs. 868 lbs.
WEIGHT COMPLETE
Models C-7.5, C-8, C-8.5, C-9
For 4x4 Heavy Duty 3/4 ton, 1 ton Pickups,
and 1 ton Cab Chassis
STEEL MOLDBOARD SPECIFICATIONS
SNOW PLOW MODEL C-7.5 C-8 C-8.5 C-9
MOLDBOARD LENGTH 7 1/2’ 8’ 8 1/2’ 9’
MOLDBOARD HEIGHT 28” 28” 28” 28”
MOLDBOARD GAUGE 12 12 12 12
VERTICAL RIBS 6 6 6 6
NO. OF TRIP SPRINGS 4 4 4 4
CUTTING EDGE 3/8”x 6” 1/2” x 6” 1/2” x 6” 1/2” x 6”
PLOWING WIDTH 79” 84” 88” 93”
AT FULL ANGLE
SECTOR 15” 15” 15” 15”
POWER ANGLING RAMS 1 1/2” x 10” 1 1/2” x 10” 1 1/2” x 10” 1 1/2” x 10”
*AVERAGE PLOW 729 lbs. 759 lbs. 797 lbs. 802 lbs.
WEIGHT COMPLETE
CONTRACTOR SERIES
14
*weight is based on average depending on specific mounting