Meyer TRIMLINE Series - Models of Meyer Snow Plows

Models TM-6, TM-6.5
For 4x4 Down Sized Pickups
and Sport Utility Vehicles
STEEL MOLDBOARD SPECIFICATIONS
SNOW PLOW MODEL TM-6 TM-6.5
MOLDBOARD LENGTH 6' 6 1/2'
MOLDBOARD HEIGHT 23" 23"
MOLDBOARD GAUGE 14 14
VERTICAL RIBS 4 4
NO. OF TRIP SPRINGS 2 2
CUTTING EDGE 3/8" x 6" 3/8" x 6"
PLOWING WIDTH 64" 69"
AT FULL ANGLE
SECTOR - -
POWER ANGLING RAMS 1 1/2" x 10" 1 1/2" x 10"
*AVERAGE PLOW 380 lbs. 400 lbs.
WEIGHT COMPLETE
*weight is based on average depending on specific mounting
Models TMP-6.5, TMP-7
For Down Sized Pickups
and Sport Utility Vehicles
MAX POLYETHYLENE SPECIFICATIONS
SNOW PLOW MODEL TMP-6.5 TMP-7
MOLDBOARD LENGTH 6 1/2' 7'
MOLDBOARD HEIGHT 23" 23"
MOLDBOARD GAUGE 3/8" 3/8"
Polyethylene Polyethylene
VERTICAL RIBS 4 4
NO. OF TRIP SPRINGS 2 2
CUTTING EDGE 3/8" x 6" 3/8" x 6"
PLOWING WIDTH 69" 74"
AT FULL ANGLE
SECTOR - -
POWER ANGLING RAMS 1 1/2" x 10" 1 1/2" x 10"
*AVERAGE PLOW 400 lbs. 424 lbs.
WEIGHT COMPLETE
*weight is based on average depending on specific mounting
TRIMLINE SERIES
8
6’, 6 1/2’, 7’, 7 1/2’ Diamond Blade
For Skid-Steer
Vehicles
STEEL MOLDBOARD SPECIFICATIONS
SNOW PLOW MODEL DTE-6 DTE-6.5 DTE-7 DTE-7.5
MOLDBOARD LENGTH 6' 6 1/2' 7' 7 1/2'
MOLDBOARD HEIGHT 26 1/2" 26 1/2" 26 1/2" 26 1/2"
MOLDBOARD GAUGE 12 12 12 12
VERTICAL RIBS 6666
NO. OF TRIP SPRINGS 4 extension 4 extension 4 extension 4 extension
CUTTING EDGE 1/2" x 6" 1/2" x 6" 1/2" x 6" 1/2" x 6"
PLOWING WIDTH 62" 68" 73" 78"
AT FULL ANGLE
SECTOR ----
POWER ANGLING RAMS 1 1/2" x 10" 1 1/2" x 10"1 1/2" x 10"1 1/2" x 10"
*AVERAGE PLOW 529 lbs. 543 lbs. 557 lbs. 578 lbs.
WEIGHT COMPLETE
*weight is based on average depending on specific mounting