Meyer TRIMLINE Series - Page 13

Models HMP-9, HMP-10
For trucks with a G.V.W. of 16,000 to 27,000
MAX POLYETHYLENE SPECIFICATIONS
SNOW PLOW MODEL HMP-9 HMP-10
MOLDBOARD LENGTH 9' 10'
MOLDBOARD HEIGHT 36" 36"
MOLDBOARD GAUGE 3/8 POLY 3/8 POLY
VERTICAL RIBS 7 7
NO. OF TRIP SPRINGS 6 6
CUTTING EDGE 1/2" x 6" 1/2" x 6"
PLOWING WIDTH 93" 103"
AT FULL ANGLE
SECTOR 15" 15"
POWER ANGLING RAMS 2" x 12" 2" x 12"
*AVERAGE PLOW 1222 lbs. 1271 lbs.
WEIGHT COMPLETE
*weight is based on average depending on specific mounting
Models HM-9, HM-10
For trucks with a G.V.W. of 16,000 to 27,000
STEEL MOLDBOARD SPECIFICATIONS
SNOW PLOW MODEL HM-9 HM-10
MOLDBOARD LENGTH 9' 10'
MOLDBOARD HEIGHT 32" 32"
MOLDBOARD GAUGE 7 7
VERTICAL RIBS 7 7
NO. OF TRIP SPRINGS 6 6
CUTTING EDGE 1/2" x 6" 1/2" x 6"
PLOWING WIDTH 93" 103"
AT FULL ANGLE
SECTOR 15" 15"
POWER ANGLING RAMS 2" x 12" 2" x 12"
*AVERAGE PLOW 1205 lbs. 1254 lbs.
WEIGHT COMPLETE
*weight is based on average depending on specific mounting
HEAVY MUNICIPAL SERIES
11