Need help?Do you have a question about the Meyra 1.363 and is the answer not in the manual?
Introduction to the scooter manual, emphasizing safety and proper handling.
Instructions for checking the scooter upon receipt and reporting any transport damage.
Information on initial scooter setup by a specialist workshop and tool requirements.
Details on the scooter's environmental friendliness and compliance with EN 614-1 standards.
Defines the scooter's purpose for paved surfaces and the driver's responsibility in traffic.
Illustrates and labels key components of the Model 1.364 scooter.
Illustrates and labels key components of the Model 1.363 scooter.
Identifies battery indicator, speed gauge, status display, and speed adjustment keys.
Explains keys for lights, hazard warning, and turn signals with their indicator gauges.
Details the driving key positions (ON/OFF) and the driving lock.
Locates and describes the battery charging socket.
Emphasizes pre-operation checks and securing the scooter.
Explains the function of Plus/Minus keys, Horn, Headlight, and Battery capacity indicator.
Describes the function of Hazard warning, Left, and Right indicator keys.
Illustrates and explains the OFF and ON positions of the driving key.
Steps to switch the scooter to push mode using the driving key and selection lever.
Procedure to select motor mode, lock the lever, and turn the driving key to ON.
Reminder for checks before journey and charging the batteries.
Warnings about unintentional movement and inserting incorrect items into the charging socket.
Instructions on how to adjust the steering column using the locking lever.
Steps to insert the driving key and turn it to the ON position.
Notes on the acceleration lever during activation and the readiness indicator.
Explains the battery indicator and how it reflects charge status.
Procedure for charging the scooter batteries, including switching off and plugging in.
Caution against incorrect use of the charging socket and information on charging time.
Guidance on checking the battery indicator after system test.
Explains LED indicators for battery capacity and factors affecting the display.
Instructions on how to pre-select the maximum driving speed using control panel keys.
Warning about potential accidents due to unsuitable maximum speed pre-selection.
Explains how speed is determined by the accelerator lever and pre-selected speed.
Safety advice for initial journeys, switching off, and inclination limits.
Details on using the accelerator lever to control speed and direction.
Describes dosed and emergency braking procedures.
Guidance on making turns and a caution about tilting during reversing.
Information on service brake, parking brake, and safety regarding brake issues.
Guidance on braking, distance considerations, and avoiding abrupt braking.
Procedures for safely transporting the scooter in vehicles.
Steps for establishing electrical safety and securing the scooter during transport.
Instructions for detaching components like the basket, seat, and steering column.
Advice on stowing detached parts securely for transport.
Lists components that can be disassembled for transport in a small vehicle.
Detailed steps for removing the seat, rear panel, and electrical connections.
Procedure for removing the drive unit by releasing a locking bolt.
Guidelines for checking components and reassembling the drive unit.
Instruction to replace the locking bolt after component reassembly.
Steps for installing batteries, securing them, and reconnecting electrical connections.
Describes the seat's features and how to turn it for easier access.
Instructions for removing and reinstalling the seat, including safety notes.
Procedure for adjusting the seat height using a locking screw.
Details on swiveling, adjusting the angle, and height of the arm supports.
How to adjust the seat width by moving the arm supports.
Procedure for adjusting the distance between the seat and the tiller.
Instructions on folding and raising the back support.
How to adjust the extension of the seat's back support.
Steps for lifting off and replacing the front basket.
Explains how anti-tip castors enhance stability, with a caution.
Instructions for strapping on and adjusting the lap belt for safety.
Highlights the benefits of regular care and maintenance for the scooter.
Guidance on tyre pressure, tread condition, and replacement.
Advice on cleaning lighting, avoiding high-pressure cleaners, and keeping electronics dry.
Guidelines for cleaning plastic components and maintaining the scooter's finish.
Methods for cleaning upholstery and covers using mild detergents.
Recommended agents for disinfection and pre-cleaning steps.
Information on reinstallation procedures and contacting specialist workshops for repairs.
Contact details for customer support, advice, service, and repairs.
Information on ordering original spare parts and the importance of vehicle identification.
Guidelines for environmentally friendly disposal of packing material, parts, and electronics.
Locates the main fuse and advises professional replacement for burnt fuses.
Steps for safely replacing fuses, including disconnecting power and using correct types.
Instructions for adjusting headlight beam visibility and position.
Procedure for replacing headlight bulbs, including safety precautions.
Step-by-step guide to removing the headlight assembly and bulb.
Instructions for inserting the new bulb, securing the contact spring, and reattaching the headlight.
Details on the spherical bulb used for the front indicator.
Steps for removing the lens, replacing the bulb, and remounting the lens.
Steps for removing the seat, rear panel, and disconnecting electrical connections for taillights.
Instructions on unscrewing attachment screws and removing the taillight and dispersion disc.
Steps for inserting the dispersion disc, tightening screws, and attaching the taillight.
Instructions for removing and mounting the rear indicator spherical bulb.
Details on the spherical bulb used for the back light.
Steps for removing and mounting the back light bulb and lens.
Highlights the need for technical knowledge and safety precautions for wheel changes.
Procedure for detaching drive wheels by unscrewing the center hexagon nut.
Steps to dismantle steering wheels by unscrewing the center hexagon nut.
Instructions for deflating the tyre, removing rim screws, and separating rim halves.
Information for authorized dealers regarding service manuals and inspection checklists.
Details on adjusting driving behavior using a programming device.
Explanation of how driving parameters define the scooter's characteristics.
Table of standard settings for acceleration, deceleration, and speed.
Provides guidance on carrying out maintenance work safely with the scooter switched off.
Importance of annual inspections by specialist workshops for safety and reliability.
Tasks before starting, checking brakes, lights, and indicators.
Checking tyre pressure every 2 weeks and tyre tread every 2 months.
Checking wheel nuts and screws for tightness every 6-8 weeks.
Performing visual checks on frame, components, and electrical cables.
Guidance on battery maintenance for sealed batteries (no maintenance required).
Recommendations for vehicle and battery charger safety inspections.
Troubleshooting for the battery indicator not lighting up or blinking.
Solutions for lighting not active and the scooter not starting off.
Lists factors influencing the scooter's range, including battery and driving conditions.
Details on climbing ability and cautions regarding performance exceeding safety limits.
Lists main fuse and charging/control system fuse ratings.
Specifies bulb types for headlights, back lights, and indicators.
Lists the necessary tools for adjustments and maintenance.
Identifies the scooter model, type plate, and class of use as per DIN EN 12184.
Provides details on the electrical system and various physical dimensions of the scooter.
Lists transport dimensions and ambient/storage temperature ranges.
Details on maximum speed, power ratings, climb-in height, and ground clearance.
Lists permissible total weight, user weight, and axle loads.
Information on battery type, dimensions, and the scooter's range.
Displays safety stickers related to documentation, push mode, and arm supports.
Explains the meaning of symbols, such as the arrow indicating touch areas.
Fields for recording model, delivery note, and vehicle identification numbers.
Sections for recording pre-delivery and subsequent safety inspection details.
Details the warranty periods for frame, parts, and batteries.
Outlines conditions not covered by the guarantee and the consequences of non-compliance.
To Next Page
General
