Need help?Do you have a question about the Meyra 1.594 and is the answer not in the manual?
General| Category | Wheelchair |
|---|---|
| Foldable | Yes |
| Footrests | Swing-away |
| Model | 1.594 |
| Seat Width | 40 cm |
| Seat Depth | 40 cm |
| Backrest Height | 40 cm |
| Wheel Size | 24 inches |
Procedures for checking vehicle for transport damage upon receipt.
Information on the wheelchair's delivery state from the specialist workshop.
Suitability for indoor/outdoor driving, Use Class B, and incline limitations.
Guidelines on lighting, part handling, temperature limits, and electrical adjustments.
Component identification for the standard CHAMP and CHAMP LIFT versions.
Component identification for the standard CHAMPI version.
Driving license, age, public passage rules, and vehicle marking for German regulations.
Information on liability insurance for wheelchairs up to 6 km/h.
Requirements for insurance, operating license, and permit for faster wheelchairs.
Compliance with EC directive, interference from radiation, and electromagnetic fields.
Guidance on careful driving, speed settings, and direction control.
Precautions on controls, seat/back support positions, and accessory attachments.
Recommendations for initial driving practice and familiarisation.
Adherence to traffic rules and basic steering/braking tests.
Importance of checking wheelchair functions before each journey.
Safe braking techniques, distances, and precautions for downhill travel.
Description of the electronic service brake for smooth, non-jerking operation.
Function as a standstill brake, activated by the release lever, ensuring power failure safety.
Procedure for locking the brake by pushing the lever forward.
Procedure for releasing the brake by pulling the lever back.
Instructions for moving the brake release lever to the drive position.
Locating and inserting the main blade-type fuse.
Guidance on positioning the operating module for safe steering.
Steps for powering on the module, including safety notes and pre-drive checks.
Benefits and handling procedure for folding up the footplates.
Benefits and handling for turning leg supports to the side.
Benefits and handling procedure for removing leg supports.
Procedure for adjusting leg support length via telescopic tube.
Instructions for adjusting leg support height using the operating module.
Procedure for swivelling leg supports upward or downward.
Procedure and benefits for dismantling electrical leg supports.
Procedure for attaching electrical leg supports and function testing.
Description of features like adjustability, lockability, and benefits.
Procedure for removing arm supports and safety notes.
Steps for detaching the operating module from the arm support.
Procedure for inserting and securing arm supports.
Steps for attaching and adjusting the operating module holder.
Procedure for adjusting the height of the arm supports.
Procedure for removing the seat cushion for maintenance.
Procedure for correctly placing the seat cushion back onto the wheelchair.
How to adjust seat width by moving arm supports.
Procedure for adjusting the seat depth from 39-48 cm.
How to manually adjust the seat angle in 4 positions.
Using the operating module for electric seat angle adjustment.
Adjusting seat angle using CAN-bus operating module.
How the rising aid works and safety precautions for use.
Procedure for detaching the back support.
Procedure for attaching the back support.
Manual adjustment of back support angle using mechanical means.
Continuous angle adjustment using pneumatic springs.
Adjusting back support angle using the CAN-bus operating module.
Instructions and safety notes for switching to and operating in push mode.
Procedure for engaging the drive mode using the brake release lever.
Information on seat belt features, benefits, and installation.
Steps for fastening and unfastening the seatbelt.
Procedure for adjusting the length of the seatbelt straps.
Information on the removable push handle for attendants.
Procedure for adjusting the position of the push bar.
Steps for positioning the operating module for accompanying persons.
Guidance on adjusting and positioning the headrest.
Description of the seat height adjustment feature and its limitations.
Safety precautions and operating guidelines for seat height adjustment.
User instructions and safety checks before performing seat height adjustment.
User instructions and safety precautions after completing seat height adjustment.
Safety information regarding transporting the wheelchair in vehicles.
Items needed and procedures for transporting the wheelchair.
Instructions for reassembling detached parts after transport.
Guidelines for loading the wheelchair using ramps or platforms.
Steps for securely fastening the wheelchair in a transport vehicle.
Safety information for loading using ramps or lifting platforms.
Safety guidelines for loading, ramp positioning, and usage.
Information on the loading capacity requirements for ramps and lifting equipment.
Details on securing systems (PRS, WRS) for wheelchair transport in vehicles.
General safety guidelines for transporting wheelchairs and occupants.
Information on product liability and risks associated with transport.
Information on the 4-way seatbelt, including cautions and fastening.
Procedure for adjusting the angle of the back support.
Steps for adjusting the height and angle of the headrest.
Procedure for adjusting the seat depth on Champi models.
Procedure for removing and adjusting the back cushion.
Procedure for removing and adjusting the seat cushion.
Adjusting the height of the backrest plate.
Procedure for adjusting the side cushions evenly.
Adjusting seat width via arm supports.
Adjusting leg support length and footplate angle.
Adjusting leg support length based on thigh length.
Height adjustment and removal/insertion of Arm Support Code 79.
Horizontal adjustment and swivelling of the operating module.
Safety guidelines for transporting objects on the wheelchair.
Guidelines for general maintenance, cleaning, and care of the wheelchair.
Procedures for disinfection and reinstallation of the wheelchair.
Information on seeking repairs and contacting customer service.
Instructions for proper disposal of wheelchair parts and packaging.
Guidelines for ordering original spare parts and safety during maintenance.
Instructions on when and how to charge the wheelchair batteries.
Guidelines for storing batteries during long periods of non-use.
Safety precautions for charging batteries, including ventilation and plug usage.
General information on battery maintenance and safety warnings.
Characteristics and suitability of maintenance-free batteries.
Procedure for safely opening the battery box for maintenance.
How to check and maintain the correct acid level in batteries.
Procedure for measuring acid density to assess battery charge state.
Step-by-step guide for replacing wheelchair batteries safely.
Instructions for removing arm supports related to external seating systems.
Specific procedures for components on CAN-bus equipped wheelchairs.
Steps for removing components related to electrical back support.
Detailed steps for removing batteries and reassembling parts.
Essential checks before starting the wheelchair, including brakes and tyres.
Checks to be performed every 2 weeks, including tyre pressure and lighting.
Maintenance tasks for batteries and general condition checks every 2-6 months.
Recommendation for an annual safety inspection by an authorized dealer.
Procedure for setting the headlights for optimal road visibility.
Step-by-step guide for replacing headlight bulbs.
Procedure for replacing the bulb in the front indicator.
Procedure for replacing the bulb in the rear indicator.
Procedure for replacing the bulb in the back light.
Guidelines for replacing defective safety fuses.
Information on the main fuse for the battery circuit and its function.
General advice on fault correction and recommended inspections.
Explanation of common labels and symbols found on the wheelchair.
Factors influencing kilometric performance and factors that impair it.
Information on the wheelchair's ability to climb gradients and related safety limits.
Detailed technical specifications for the CHAMP, MODEL 1.594.
Detailed technical specifications for the CHAMP LIFT, MODEL 1.594-27.
Detailed technical specifications for the CHAMPI, MODEL 1.594-603.
Data on battery types, dimensions, and tilting angles for different models.
Information on wheelchair range and performance metrics like speed and gradients.
Weight specifications for the Champ 1.594 model.
Weight specifications for the Champ Lift 1.594-27 model.
Weight specifications for the Champi 1.594-603 model.
Fields for recording vehicle data and inspection history.
Details of the product warranty, exclusions, and conditions.
To Next Page
