MINI-BIKE ASSEMBLY GUIDELINES
- 3 -
IMPORTANT!
READ THIS PAGE BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable
laws and regulations and riders must comply with all require-
ments regarding head, eye and body protection. Please check
with appropriate government agencies before operating your
mini-bike. Prior to any operation, all riders must be properly
trained in, and fully knowledgeable of all mini-bike functions
and safe operation and procedure. Full compliance with this
with all information set forth in these guidelines is mandatory.
FAILURE TO FULLY COMPLY IS UNSAFE AND COULD
POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS
UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN
GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD
COVERING BOTH SPROCKETS AND THE CHAIN. Ask your
engine provider to provide with an appropriate Chain Guard.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals
using appropriate tools. Please consult with your retailer or a
Kart or Mini-Bike shop or your local, knowledgeable mechanic
if you experience problems with, or have questions about any
portion of the assembly process, individual or overall function
or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Con-
tainment guards and eye protection should be used when
inflating tires. Assemble tires and wheels with care. Never force
a tire onto a wheel by prying against the wheel rim. A properly
assembled tire will seat itself onto the wheel rim with less than
15 pounds per square inch (psi) of air pressure.
To Next Page
Loading...