MINI-BIKE ASSEMBLY GUIDELINES
- 4 -
☛ ABOUT THE CONTENTS
All of the components you need to assemble a mini-bike chassis
have been delivered to you in one cardboard carton. An engine,
engine mounting hardware, clutch and chain guard are not
included and
must be obtained and installed before you
operate your mini-bike.
Folded into this booklet, is a single sheet entitled “Mini-Bike
Components Checklist” which looks like this
Use the Components Checklist while you unpack and assemble
your Mini-Bike. It lists each component by two numbers. Those in
the “Item” column are used throughout this booklet to refer you to
individual components. The “Mfgr. No.” is listed to aid your retail
merchant should you have questions or require replacement
parts. The illustration on the last page of this booklet is provided
to help you locate components and to present a basic visual guide
to assembly. Use it with these written guidelines.
A few more matters before you begin assembly:
ASSEMBLY GUIDELINES
ASSEMBLY GUIDELINES
To Next Page
Loading...