To Next PageTo Next Page
Need help?Do you have a question about the MFJ Enterprises MFJ-1278 and is the answer not in the manual?
General| Interface | RS-232 |
|---|---|
| Power Supply | 12 VDC |
| Modes | Packet, AMTOR, RTTY, ASCII |
| Baud Rate | 300 |
| Type | Multimode Controller |
Details on connecting the AC adapter and power requirements for the MFJ-1278.
Instructions for connecting the MFJ-1278 to IBM, Commodore, and Macintosh computers.
Procedure for setting transmit audio levels for VHF packet operation.
Procedure for setting transmit audio levels for HF packet operation.
Details on configuring parameters for 2400 baud packet operation.
Information on automatic gain control for receive audio in 2400 packet mode.
How to adjust transmit audio levels for the 2400 modem.
Analyzes incoming signals (RTTY, ASCII, AMTOR, HF packet) and displays status.
Command used with ASA to accept analyzed results and set the operating mode.
Wiring diagrams for 8-pin microphone connectors for Kenwood, ICOM, and Yaesu radios.
Wiring diagrams for 4-pin microphone connectors for Kenwood, ICOM, and Yaesu radios.
Wiring for handheld radio connectors (TNC-2) for Kenwood, ICOM, and Yaesu radios.
Diagrams for using the accessory jack on specific radios like TS440 and ICOM 735.
Pinout tables for connecting specific Kenwood, ICOM, and Yaesu radios.
