EasyManua.ls Logo

MFZ Ovitor TVR(FC) 5 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING AND MAINTENANCE INSTRUCTIONS
DOOR OPERATOR TVR(FC) 5
OVITOR OY
SIENITIE 24
FIN‐00760 HELSINKI
FINLAND
Tel. +358 (0) 207 106 600
Fax. +358 (0) 207 106 601
ENG
Question and Answer IconNeed help?

Do you have a question about the MFZ Ovitor TVR(FC) 5 and is the answer not in the manual?

MFZ Ovitor TVR(FC) 5 Specifications

General IconGeneral
BrandMFZ Ovitor
ModelTVR(FC) 5
CategoryGarage Door Opener
LanguageEnglish

Summary

KEY TO SYMBOLS

GENERAL INFORMATION

SAFETY INSTRUCTIONS

Essential safety guidelines for installation, maintenance, and operation to prevent injury and damage.

RATING PLATE

Details the location and importance of rating plates on the gear box and motor for technical information.

PRODUCT RANGE

OPTIONS

Lists available options for the TVR 5 door operator, including disengagement/slipping clutches and motor types.

MECHANICAL INSTALLATION

ELECTRICAL INSTALLATION

SET UP

Adjustment of the slipping clutch

Explains how to adjust the slipping clutch for torque limitation to ensure safe door operation and prevent damage.

Adjustment of the limit switches

Details the procedure for adjusting the limit switches for correct door end position control.

Digital settings -limit switch and safety circuit for drive

Covers digital settings for limit switches and safety circuits, including wiring and encoder connections.

OPERATION

Disengagement clutch (not TVR type)

Explains the operation of the disengagement clutch for manual door control and its effect on the micro switch.

SERVICE AND MAINTENANCE

Changing the friction lining of the slipping clutch

Step-by-step guide for replacing the friction lining of the slipping clutch, a key service operation.

Permitted load

Specifies the maximum permitted torque and service life of the door operator.

Spare parts

Instructions on how to order spare parts, emphasizing serial and part numbers.

Fault tracing

Provides guidance on identifying and diagnosing faults in the door operator system.

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

Related product manuals