EasyManua.ls Logo

MFZ Ovitor STA 1 KE User Manual

MFZ Ovitor STA 1 KE
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN
Sectional door operator STA 1 / Rev. D 0.4 – 1
Operating Instructions
STA 1 sectional door operator
Question and Answer IconNeed help?

Do you have a question about the MFZ Ovitor STA 1 KE and is the answer not in the manual?

MFZ Ovitor STA 1 KE Specifications

General IconGeneral
BrandMFZ Ovitor
ModelSTA 1 KE
CategoryGarage Door Opener
LanguageEnglish

Summary

3. General safety instructions

Instructions regarding installation, connection and maintenance

Safety guidelines for installation, connection, and maintenance tasks.

4. Overview of products

5. Installation

5.1 Preparation

Pre-installation checks and site preparation for the operator.

5.2 Push-on assembly

Procedures for mounting the operator onto the drive shaft.

5.3 Installation of the emergency hand chain

How to correctly install the emergency hand chain for manual operation.

6. Initial Operation

6.1 Preparation

Steps for preparing the operator before initial power-up and use.

6.2 Connection

Detailed instructions for electrical wiring and connections.

Limit switch connections

Wiring diagrams and pin assignments for limit and safety switches.

6.3 Manual settings

How to adjust control cams and set limit switch positions manually.

6.4 Digital settings - Limit switch and safety circuit for drive

Configuration of electronic interfaces and digital limit/safety circuits.

6.5 Check the system

Procedures for verifying system operation and mechanical functions.

7. Emergency operation

Operation with emergency hand chain

Manual operation of the door using the emergency hand chain.

Operation with emergency hand crank

Manual operation of the door using the emergency hand crank.

Operation with release mechanism

How to use the release mechanism for manual door movement.

8. Maintenance

9. Technical data

10. Manufacturer's Declaration

Declaration of incorporation

Statement regarding its use as an incomplete machine in other systems.

Declaration of conformity

Statement confirming compliance with EMC and RoHS directives.

Related product manuals